Code:
Z3X EasyJtag Software ver. 3.7.0.17
Loading eMMC GEN1 Firmware... IO: 2800 mV
Box S/N: 0707031F7AA05FBD, ,FW Ver.: 01.63
CMD Pullup Level:2041 mV
CMD Active Level:2547 mV
Box IO Level:2800 mV
CLK Rate:21000 kHz
Bus Width:1bit,SDR
HiPower mode is ON!
---------- eMMC Device Information ----------
eMMC CID : 150100474436424D420163BE96B5A586
eMMC CSD : D02701320F5903FFF6DBFFEF8E40400C
eMMC Manufacturer ID: 0015 , OEM ID: 0100
eMMC Date: 10/2018 Rev.0x1
eMMC NAME: GD6BMB , S/N: 1673434805
eMMC NAME (HEX): 474436424D42
EMMC ROM1 (Main User Data) Capacity: 29820 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB
EMMC RPMB is programmed and written 143920 times
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG: 0x38] Boot from:ROM1 (Main User Area)
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x38.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity WP group size [HC_WP_GRP_SIZE: 0x00004000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: GD6BMB_1673434805_20200817_1344.extcsd
The protective MBR's 0xEE partition is oversized! Auto-repairing.
Found valid GPT with protective MBR; using GPT.
Real (Hardware) Disk/Image size: 3A3E000 sectors 29.1 GiB
Soft (Partitioned) Disk/Image size: 3A3DFBC sectors 29.1 GiB
Disk identifier (GUID): 98101B32-BBE2-4BF2-A06E-2BB33D000C20
Logical sector size: 0x200 bytes ,First/Last usable sector: 34,61071326
Partition info successfully found
------ Android information ------
Detected LINUX(Android) SYSTEM : 0x0042800000 (3.352GB)
Short EXT fs info:
Size: 3.298GB
Block size: 4.0KB
Inode size: 256
Inodes: 216432
Short Android info:
Unable to read prop.plist , code : 2
---------------------------------------------
Detected USERDATA USERDATA : 0x015B800000 (23.690GB)
Unable to mount USERDATA , code : 95
Userdata Superblock contents::
D634632D 85FA29F3 F2E506D2 1CF131FD EACF2DC3 E1F08E83 0779B58B 354A1496 Ö4c-…ú)óòå.Ò.ñ1ýêÏ-ÃáðŽƒ.yµ‹5J.–;
163B8B34 F569C8C0 18301A5F 1179F6D5 30A2C120 5D0028F0 4B87CDE7 6066010C .;‹4õiÈÀ.0._.yöÕ0¢Á ].(ðK‡Íç`f..;
C48E1A0E C8FF9E72 CBF154EC CC443BAD 10FF6CFB A6E75C6F 16F8248F 9DB98CC0 ÄŽ..ÈÿžrËñTìÌD;*.ÿlû¦ç\o.ø$..¹ŒÀ;
9792B981 E512C6F1 A59F3BE6 1427F8AC FBAD1447 AF6355A9 F0D2D566 97A82A5C —’¹.å.Æñ¥Ÿ;æ.'ø¬û*.G¯cU©ðÒÕf—¨*\;
54AAE9C9 507C9DD0 8955C4DE D75C09E1 35CEFAE9 5656DEF9 4F47090C E87C37A2 TªéÉP|.ЉUÄÞ×\ á5ÎúéVVÞùOG .è|7¢;
5D12F351 2D86B3A1 588D8AD0 6A576EE1 CE02F2F5 75072D21 F02CB423 D6787727 ].óQ-†³¡X.ŠÐjWnáÎ.òõu.-!ð,´#Öxw';
04892494 B17B8C51 EE99F429 1E4FF2A7 7376D8E0 4258737C BE6008BC 972D45BD .‰$”±{ŒQî.ô).Oò§svØàBXs|¾`.¼—-E½;
D212D155 1F66CB8E 01799907 834BF205 A9B3455B F4B6D995 6F508569 E71C8ED3 Ò.ÑU.fËŽ.y..ƒKò.©³E[ô¶Ù•oP…iç.ŽÓ;
Done.
Z3X EasyJtag Software ver. 3.7.0.17
Loading eMMC GEN1 Firmware... IO: 2800 mV
Box S/N: 0707031F7AA05FBD, ,FW Ver.: 01.63
CMD Pullup Level:2041 mV
CMD Active Level:2609 mV
Box IO Level:2800 mV
CLK Rate:21000 kHz
Bus Width:1bit,SDR
HiPower mode is ON!
---------- eMMC Device Information ----------
eMMC CID : 150100474436424D420163BE96B5A586
eMMC CSD : D02701320F5903FFF6DBFFEF8E40400C
eMMC Manufacturer ID: 0015 , OEM ID: 0100
eMMC Date: 10/2018 Rev.0x1
eMMC NAME: GD6BMB , S/N: 1673434805
eMMC NAME (HEX): 474436424D42
EMMC ROM1 (Main User Data) Capacity: 29820 MB , 0x3A3E000 pages , 0x747C00000 bytes
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB
EMMC RPMB is programmed and written 143920 times
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG: 0x38] Boot from:ROM1 (Main User Area)
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x38.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity WP group size [HC_WP_GRP_SIZE: 0x00004000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Writing Recovery Command to MISC (33)
Done.