| LG K50S x540HM repair done as X540BMW
Platform: LG MTK
Selected port: COM415
Selected baudrate: 0
Selected model: X540BMW
Selected USB connection type
Please, disconnect cable, power phone OFF, connect P999 cable
(with 910k resistor)
or
Power OFF phone, press and hold "Vol+" for 10 seconds and
connect USB cable.
Phone found at port COM415
Mode: Emergency
Initializing flash...OK
Model ID: LM-X540HM
Platform: mt6765
Android version: 9
SW version: LMX540HMAT-00-V10c-732-101-JUL-20-2020+2
LAF Version: 1.1
Product ID: CB42S200xxxxxxxx
IMEI: 358946-xxxxxxxxxxxx
Target operator: LAO
Hardware: rev_10
Battery level: 50%
Reading partitions...OK
LAF Error: 80000119.
Checking security...OK
--------------------------------------------------------------------------------
IMEI A: 3589xxxxxxxxx
IMEI B: Bad
Bluetooth address: Unknown
Wi-Fi MAC address: Unknown
--------------------------------------------------------------------------------
Write security backup function doesn't work for this device with
latest firmware versions. If you'll encounter any problem during
Repair IMEI operation - you won't be able to restore the phone to
it's initial state, so proceed at your own risk.
Continue?
Connecting to server...OK
Octopus smart card is present.
Checking smart card...OK
Username: xxxxxxxxxxxxxxx
Authorizing...OK
Checking balance...OK
Checking operation...OK
Sending device information...OK
Get credits, needed for current operation...OK
Your balance: xxx credits.
To perform "Repair IMEI" operation you need to have 100 credits.
Fixing IMEI...
New IMEI A: 3589xxxxxxxxx
Patching security...
Writing security area...
Initializing flash...OK
Writing security area...OK
Initializing flash...OK
Reading partitions...OK
Prepairing for change protect status...
Initializing flash...OK
Removing write protection...OK
Initializing flash...OK
Reading partitions...OK
Erasing part 1...OK
Initializing flash...OK
Erasing part 2...OK
Initializing flash...OK
Reading partitions...OK
Prepairing for change protect status...
Initializing flash...OK
Restore write protection...OK
Initializing flash...OK
Reading partitions...OK
IMEI successfully fixed!
Warning: If your device were stuck at logo, after operation was
completed, then please, don't reflash your device, first contact
with Support via Skype or create thread at forum!
Performed by 3.0.3.04 Software version. |