Quote:
Originally Posted by MrClone  I have an OLD Z3X box
I connected wires very well like diagrams you posted here
I tried to supply power from the box ( pin 17 ) and external
I tried with and pull up without resistor |
power from 17-19 pin of box available only at EasyJTAG
Plus box
you need use external power with correct current chip voltage (1.8, 2.8 or 3.3v)
correct chip voltage you can give from datasheet
some chips can't work with non-correct voltage
MX25L3205D need use 2.7-3.6v power
you can use RG45 connector for power chip, but at it only +5v