Found 1 serial devices
COM4 USB\VID_1781&PID_AAAC&REV_0100&MI_00 USB Serial Device (COM4)
Selected pinout: GEN2 ISP Pinout
Change EasyJTAG Pinout OK
Z3X EasyJtag Software ver. 3.7.0.20
UFS Socket Info.
Serial: 01235187A747BA89EE
Description: EasyJTAG UFS Socket 3 in 1 by MOORC 16.05.19
Identify UFS Chip.
UFS Chip Voltage: Low
VCC: 3298mV
VCCQ2: 1810mV
Chip Info:
Manufacturer: TOSHIBA
ProductName: THGBF7G9L4LBATRA
SerialNumber: F5661Y006G00
Firmware Version: 5.00
UFS Version: 2.0
Maximum Number of LUs: 8
Number of LUs found: 4
LUN 0:
Block size: 0x1000
Size: 0xEE5000000 / 59,592,000,000B / 59GB
LUN 1 (Boot A):
Block size: 0x1000
Size: 0x400000 / 0,004,000,000B / 4MB
LUN 2 (Boot B):
Block size: 0x1000
Size: 0x400000 / 0,004,000,000B / 4MB
LUN 3:
Block size: 0x1000
Size: 0x800000 / 0,008,000,000B / 8MB
Number of W-LUs found: 1
W-LUN 0xC4 (REPORT LUNS):
Block size: 0x100
Size: 0x400000 / 0,004,000,000B / 4MB
Full size: 0xEE6800000 / 59,616,000,000B / 59GB
Health:
Device life time method A: 0x01 (0%-10% device life time used)
Device life time method B: 0x01 (0%-10% device life time used)
Pre End of Life: 0x01 (Used less then 80% of reserved blocks)
Chip config is OTP
Checking LU0 for partitioning
EFI Table seems to be corrupted (sizeOfPartitionEntries!=128) sizeOfPartitionEntries = 0
LUN0 Have 23 partitions
Can't stop LUN0, Code: -407, Reason: UAP SCSI: Command sense: DATA_PROTECT
LUN1 Have no partitions
Can't stop LUN1, Code: -407, Reason: UAP SCSI: Command sense: DATA_PROTECT
LUN2 Have no partitions
Can't stop LUN2, Code: -407, Reason: UAP SCSI: Command sense: DATA_PROTECT
LUN3 Have 1 partitions
Can't stop LUN3, Code: -407, Reason: UAP SCSI: Command sense: DATA_PROTECT
------ Detected 24 partitions ------
LUN0 (BOTA0) [0x400000 0x400000] Size: 4.0MB
LUN0 (BOTA1) [0x800000 0x400000] Size: 4.0MB
LUN0 (EFS) [0xc00000 0x1400000] Size: 20.0MB
LUN0 (PARAM) [0x2000000 0x800000] Size: 8.0MB
LUN0 (UP_PARAM) [0x2800000 0x800000] Size: 8.0MB
LUN0 (BOTA2) [0x3000000 0x800000] Size: 8.0MB
LUN0 (BOOT) [0x3800000 0x2800000] Size: 40.0MB
LUN0 (RECOVERY) [0x6000000 0x2e00000] Size: 46.0MB
LUN0 (OTA) [0x8e00000 0x800000] Size: 8.0MB
LUN0 (RADIO) [0x9600000 0x2a00000] Size: 42.0MB
LUN0 (TOMBSTONES) [0xc000000 0x100000] Size: 1.0MB
LUN0 (DNT) [0xc100000 0x100000] Size: 1.0MB
LUN0 (PERSISTENT) [0xc200000 0xc0000] Size: 768.0KB
LUN0 (STEADY) [0xc2c0000 0x100000] Size: 1.0MB
LUN0 (PERSDATA) [0xc3c0000 0x900000] Size: 9.0MB
LUN0 (SYSTEM) [0xccc0000 0x16a800000] Size: 5.664GB
LUN0 (CACHE) [0x1774c0000 0xfa00000] Size: 250.0MB
LUN0 (HIDDEN) [0x186ec0000 0x500000] Size: 5.0MB
LUN0 (OMR) [0x1873c0000 0xa00000] Size: 10.0MB
LUN0 (CP_DEBUG) [0x187dc0000 0x500000] Size: 5.0MB
LUN0 (NAD_FW) [0x1882c0000 0x1400000] Size: 20.0MB
LUN0 (NAD_REFER) [0x1896c0000 0x100000] Size: 1.0MB
LUN0 (USERDATA) [0x1897c0000 0xd5b400000] Size: 53.425GB
LUN3 (CPEFS) [0x6000 0x600000] Size: 6.0MB
------------------------------------
Read SYSTEM from LUN0.
EFI Table seems to be corrupted (sizeOfPartitionEntries!=128) sizeOfPartitionEntries = 0
------ Android information ------
Detected LINUX(Android) SYSTEM : 0x000CCC0000 (5.664GB)
Unable to mount SYSTEM , code : 95
---------------------------------------------
Can't stop LUN-407, Code: 122053072, Reason: ------------------------------------
Done.
UFS Socket Info.
Serial: 01235187A747BA89EE
Description: EasyJTAG UFS Socket 3 in 1 by MOORC 16.05.19
Write UFS LUN0, Address: 0x0 ,Length: 0xEE5000000
Input file
:\_A\SM-N930F_UFS\LUN all\UFS_THGBF7G9L4LBATRA_LUN0_00000000_EE5000000.b in
Start
Can't write address 0x0, Code: -407, Reason: UAP SCSI: Command sense: DATA_PROTECT
Can't stop LU, Code: -407, Reason: UAP SCSI: Command sense: DATA_PROTECT
Done.
Z3X EasyJtag Software ver. 3.7.0.20
UFS Socket Info.
Serial: 01235187A747BA89EE
Description: EasyJTAG UFS Socket 3 in 1 by MOORC 16.05.19
Write UFS LUN1, Address: 0x0 ,Length: 0x400000
Input file
:\_A\SM-N930F_UFS\LUN all\UFS_THGBF7G9L4LBATRA_LUN1_00000000_00400000.bi n
Start
Can't write address 0x0, Code: -407, Reason: UAP SCSI: Command sense: DATA_PROTECT
Can't stop LU, Code: -407, Reason: UAP SCSI: Command sense: DATA_PROTECT
Done.
Z3X EasyJtag Software ver. 3.7.0.20
UFS Socket Info.
Serial: 01235187A747BA89EE
Description: EasyJTAG UFS Socket 3 in 1 by MOORC 16.05.19
Write UFS LUN2, Address: 0x0 ,Length: 0x400000
Input file
:\_A\SM-N930F_UFS\LUN all\UFS_THGBF7G9L4LBATRA_LUN2_00000000_00400000.bi n
Start
Can't write address 0x0, Code: -407, Reason: UAP SCSI: Command sense: DATA_PROTECT
Can't stop LU, Code: -407, Reason: UAP SCSI: Command sense: DATA_PROTECT
Done.
Z3X EasyJtag Software ver. 3.7.0.20
UFS Socket Info.
Serial: 01235187A747BA89EE
Description: EasyJTAG UFS Socket 3 in 1 by MOORC 16.05.19
Write UFS LUN3, Address: 0x0 ,Length: 0x800000
Input file
:\_A\SM-N930F_UFS\LUN all\UFS_THGBF7G9L4LBATRA_LUN3_00000000_00800000.bi n
Start
Can't write address 0x0, Code: -407, Reason: UAP SCSI: Command sense: DATA_PROTECT
Can't stop LU, Code: -407, Reason: UAP SCSI: Command sense: DATA_PROTECT
Done.