Huawei p20 pro clt-l09 frp free free free no need tp
Quote:
welcome to octoplus huawei software v.1.2.2
to enable 'manufacture' mode dial
- for qualcomm and hisilicon based models: *#*#2846579#*#*
projectmenu > background settings > usb port settings > manufacture mode
- for mtk based models: *#*#14789632#*#*
projectmenu > background settings > usb port settings > debug mode
to enable 'fastboot' mode
1. Power off the phone. Remove sd and sim cards
2. Press 'vol-' and insert usb cable
3. Wait until phone enters 'fastboot' mode
to enable 'upgrade' mode
1. Power off the phone. Remove sd and sim cards
2. Press and hold 'vol-' and 'vol+' keys and insert usb cable
3. Wait until phone enters 'upgrade mode'
found com ports:
1: Com1 communications port
2: Com3 intel(r) active management technology - sol
3: Com31 usb serial port
2020-10-22 12:49:32 gmt -------------------------------------------------
starting on/off factory mode
selected phone model: Clt-l09
to enable factory mode put the phone in upgrade mode and connect usb cable!
To disable factory mode put the phone in factory or fastboot mode and connect usb cable!
Performing on factory mode operation...
Checking firmware package type
initializing remote service connection...
Downloading patch files from server...
Searching device in upgrade mode...
Connecting to phone..
Warning: Switching your device to factory mode is not possible! Please, connect your device via test point and perform the desired operation.
On/off factory mode failed.
Performed by 1.2.2 software version.
2020-10-22 12:52:35 gmt -------------------------------------------------
starting on/off factory mode
selected phone model: Clt-l09
to enable factory mode put the phone in upgrade mode and connect usb cable!
To disable factory mode put the phone in factory or fastboot mode and connect usb cable!
Performing on factory mode operation...
Checking firmware package type
initializing remote service connection...
Downloading patch files from server...
Searching device in upgrade mode...
Connecting to phone..
Phone connect successfully!
Writing firmware partitions...
Writing sha256rsa partition...
Writing crc partition...
Writing base_verlist partition...
Writing package_type partition...
Writing xloader partition...
Firmware writing successfully completed
on/off factory mode done.
Performed by 1.2.2 software version.
2020-10-22 12:53:29 gmt -------------------------------------------------
starting connect
selected phone model: clt-l09
searching huawei usb com 1.0 port...
Writing bootloader kirin970_a8.1_v0...
Initializing remote service connection...
Writing xloader partition...
Writing uce partition...
Writing fastboot partition...
Bootloader update successfully
rebooting to fastboot mode...
Searching fastboot devices...
Found a fastboot device: Lcl7n18b14002034
device model: clt-l09
system: clt-l09 9.1.0.372(c782e10r1p9)
meid: a000009c5593a3
imei a: 867259039749225
imei b: 867259039749225
s/n: lcl7n18b14002034
fb lock state: unlocked
user lock state: locked
co
2020-10-22 12:56:52 gmt -------------------------------------------------
starting on/off factory mode
selected phone model: Clt-l09
to enable factory mode put the phone in upgrade mode and connect usb cable!
To disable factory mode put the phone in factory or fastboot mode and connect usb cable!
Performing off factory mode operation...
Searching fastboot devices...
Found a fastboot device: Lcl7n18b14002034
canceling... Please be patient!
Device model: clt-l09
using the following method...
Error: Reading partition xloader failed!
On/off factory mode failed.
Performed by 1.2.2 software version.
2020-10-22 12:57:05 gmt -------------------------------------------------
starting reset frp (fastboot mode)
searching fastboot devices...
Error: Fastboot connect fail. Access denied
error: Please, check if device is not in use by other applicaion
reset frp (fastboot mode) failed.
Performed by 1.2.2 software version.
2020-10-22 12:57:10 gmt -------------------------------------------------
starting on/off factory mode
selected phone model: Clt-l09
to enable factory mode put the phone in upgrade mode and connect usb cable!
To disable factory mode put the phone in factory or fastboot mode and connect usb cable!
Performing off factory mode operation...
Searching fastboot devices...
Found a fastboot device: Lcl7n18b14002034
device model: clt-l09
system: clt-l09 9.1.0.372(c782e10r1p9)
meid: a000009c5593a3
imei a: 867259039749225
imei b: 867259039749225
s/n: lcl7n18b14002034
writing secure data...
Rebooting device...
On/off factory mode done.
Performed by 1.2.2 software version.
2020-10-22 12:57:26 gmt -------------------------------------------------
starting on/off factory mode
selected phone model: Clt-l09
to enable factory mode put the phone in upgrade mode and connect usb cable!
To disable factory mode put the phone in factory or fastboot mode and connect usb cable!
Error: No devices to on/off factory mode!
On/off factory mode failed.
Performed by 1.2.2 software version.
2020-10-22 12:58:59 gmt -------------------------------------------------
starting on/off factory mode
selected phone model: Clt-l09
to enable factory mode put the phone in upgrade mode and connect usb cable!
To disable factory mode put the phone in factory or fastboot mode and connect usb cable!
Performing on factory mode operation...
Checking firmware package type
initializing remote service connection...
Downloading patch files from server...
Searching device in upgrade mode...
Connecting to phone..
Phone connect successfully!
Writing firmware partitions...
Writing sha256rsa partition...
Writing crc partition...
Writing base_verlist partition...
Writing package_type partition...
Writing xloader partition...
Firmware writing successfully completed
on/off factory mode done.
Performed by 1.2.2 software version.
2020-10-22 12:59:16 gmt -------------------------------------------------
starting reset frp (factory mode)
selected phone model: Clt-l09
searching huawei usb com 1.0 port...
Writing bootloader kirin970_a8.1_v0...
Initializing remote service connection...
Writing xloader partition...
Writing uce partition...
Writing fastboot partition...
Bootloader update successfully
rebooting to fastboot mode...
Searching fastboot devices...
Found a fastboot device: Lcl7n18b14002034
device model: clt-l09
system: clt-l09 9.1.0.372(c782e10r1p9)
meid: a000009c5593a3
imei a: 867259039749225
imei b: 867259039749225
s/n: lcl7n18b14002034
writing frp partition..
Reset frp (factory mode) done.
Performed by 1.2.2 software version.
rebooting to fastboot mode...
Searching fastboot devices...
Found a fastboot device: Lcl7n18b14002034
device model: clt-l09
system: clt-l09 9.1.0.372(c782e10r1p9)
meid: a000009c5593a3
imei a: 867259039749225
imei b: 867259039749225
s/n: lcl7n18b14002034
fb lock state: unlocked
user lock state: locked
connect done.
Performed by 1.2.2 software version.
|