View Single Post
Old 10-24-2020, 11:23   #19 (permalink)
AbDuLlAH kHaWaR
Banned
 
Join Date: Nov 2010
Location: :::LONDON:::
Posts: 1,608
Member: 1442994
Status: Offline
Thanks Meter: 899
Huawei p30 pro vog-l29 frp done with 100 credits with out tp
Quote:
welcome to octoplus huawei software v.‪1.2.2.2‬

to enable 'manufacture' mode dial
- for qualcomm and hisilicon based models: *#*#2846579#*#*
projectmenu > background settings > usb port settings > manufacture mode
- for mtk based models: *#*#14789632#*#*
projectmenu > background settings > usb port settings > debug mode

to enable 'fastboot' mode
1. Power off the phone. Remove sd and sim cards
2. Press 'vol-' and insert usb cable
3. Wait until phone enters 'fastboot' mode

to enable 'upgrade' mode
1. Power off the phone. Remove sd and sim cards
2. Press and hold 'vol-' and 'vol+' keys and insert usb cable
3. Wait until phone enters 'upgrade mode'

found com ports:
1: Com1 communications port
2: Com3 intel(r) active management technology - sol
3: Com31 usb serial port

job id: 000000000017d42d
2020-10-24 10:18:20 gmt -------------------------------------------------
starting on/off factory mode
selected phone model: Vog-l29
to enable factory mode put the phone in upgrade mode and connect usb cable!
To disable factory mode connect the phone in factory mode or factory fastboot mode!
Checking the existence of the auto firmware file...
Performing on factory mode operation...
Initializing remote service connection...
Checking firmware package type
searching device in upgrade mode...
Connecting to phone..
Phone connect successfully!
Writing firmware partitions...
Writing ‪sha256rsa‬ partition...
Writing ‪crc‬ partition...
Writing ‪base_verlist‬ partition...
Writing ‪base_ver‬ partition...
Writing ‪package_type‬ partition...
Writing ‪hisiufs_gpt‬ partition...

On/off factory mode done.
Performed by ‪1.2.2.2‬ software version.

Job id: 000000000017d468
2020-10-24 10:19:17 gmt -------------------------------------------------
starting reset frp (factory mode)
selected phone model: Vog-l29
username:
Warning: Invalid username

reset frp (factory mode) failed.
Performed by ‪1.2.2.2‬ software version.
Your balance: 100 credit(s)

job id: 000000000017d4f2
2020-10-24 10:21:14 gmt -------------------------------------------------
starting reset frp (factory mode)
selected phone model: Vog-l29
username: Octopus768
connecting to the credit server...
Checking balance...
Your balance: 100 credits
to perform this operation you need to have: 100 credits.
Searching huawei usb com 1.0 port...
Writing bootloader kirin980_v1...
Initializing remote service connection...
Writing ‪xloader‬ partition...
Writing ‪uce‬ partition...
Writing ‪fastboot‬ partition...
Bootloader update successfully
rebooting to fastboot mode...
Searching fastboot devices...
Found a fastboot device: 026ayu199g001352
sending device information...
Sending firmware information...

Device model: ‪vog-l29‬
system: ‪vog-l29 10.1.0.150(c431e19r2p5)‬
resetting frp...
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
Fb lock state: ‪unlocked‬
user lock state: ‪locked‬

device model: ‪vog-l29‬
system: ‪vog-l29 10.1.0.150(c431e19r2p5)‬
meid: ‪a00000b0bb3961‬
imei a: ‪867915042842980‬
imei b: ‪867915042854993‬
writing frp partition..
Rebooting device...

Reset frp (factory mode) done.
Performed by ‪1.2.2.2‬ software version.
  Reply With Quote
The Following User Says Thank You to AbDuLlAH kHaWaR For This Useful Post:
 
Page generated in 0.09136 seconds with 7 queries