View Single Post
Old 10-27-2020, 13:10   #26 (permalink)
AbDuLlAH kHaWaR
Banned
 
Join Date: Nov 2010
Location: :::LONDON:::
Posts: 1,607
Member: 1442994
Status: Offline
Thanks Meter: 899
Huawei psmat fig-lx1 unlock with tp fee
Quote:
welcome to octoplus huawei software v.‪1.2.1‬

to enable 'manufacture' mode dial
- for qualcomm and hisilicon based models: *#*#2846579#*#*
projectmenu > background settings > usb port settings > manufacture mode
- for mtk based models: *#*#14789632#*#*
projectmenu > background settings > usb port settings > debug mode

to enable 'fastboot' mode
1. Power off the phone. Remove sd and sim cards
2. Press 'vol-' and insert usb cable
3. Wait until phone enters 'fastboot' mode

to enable 'upgrade' mode
1. Power off the phone. Remove sd and sim cards
2. Press and hold 'vol-' and 'vol+' keys and insert usb cable
3. Wait until phone enters 'upgrade mode'

found com ports:
1: Com1 communications port

2020-10-27 12:05:44 gmt -------------------------------------------------
starting connect
selected phone model: ‪fig-lx1‬
searching huawei usb com 1.0 port...
Writing bootloader kirin659_a8.0_v1...
Initializing remote service connection...
Writing ‪xloader‬ partition...
Writing ‪fastboot‬ partition...
Bootloader update successfully
rebooting to fastboot mode...
Searching fastboot devices...
Found a fastboot device: Hbedu18425005725

device model: ‪fig-lx1‬
system: ‪fig-lx1 9.1.0.206(c02e13r1p5)‬
meid: ‪00000000000000‬
imei a: ‪865878039272847‬
imei b: ‪000000000000000‬
s/n: ‪hbedu18425005725‬
fb lock state: ‪unlocked‬
user lock state: ‪locked‬

connect done.
Performed by ‪1.2.1‬ software version.

2020-10-27 12:06:38 gmt -------------------------------------------------
starting direct unlock
saving backup of modem_secure...
Initializing remote service connection...
Downloading unlock patch files...
Error: Can't get file imeifile_i1.bin!
Error: Can't get file imeifile_i1.hash!
Writing modem_secure partition...
Rebooting device...

Direct unlock done.
Performed by ‪1.2.1‬ software version.
  Reply With Quote
The Following User Says Thank You to AbDuLlAH kHaWaR For This Useful Post:
 
Page generated in 0.07304 seconds with 7 queries