[YellowBoss]

Originally Posted by profkefah

assalmu alykom
phone issue
reboot once make call



format then read flash done

Chinese Miracle II  [MTK module] v 1.58

Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Device boot not done
Check Drivers
Try again 

Boot Error!

Operation Failed
Elapsed: 00:00:22
Reconnect Power/Cable!


Operation : Format FileSystem [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 115 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0000
BB_CPU_SN : 6BF3410C8B775D50CAA684F0F84D3574
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
InitRes : 00000000
DEV[0] : 2C00 CB00 1800 0000
DEV[1] : 0000 0000 0000 0000
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8B
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00EE , [Numonyx] N25W128
[0] : FLASH_DIE : 002C 00CB 0018 0000 
[0] : FLASH_LEN : 0x01000000
INT_RAM : 0x0000D000
EXT_RAM : 0x00800000

Backup done
Executing FFS FORMAT now...
FAT_RANGE : 0x00E00000-0x00FFFFFF , LEN : 0x00200000
DA_RET   : DA_IN_PROGRESS
DA_RET   : FORMAT_DONE

Done!
Elapsed: 00:00:36
Reconnect Power/Cable!


Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )

Wait for phone...
Phone found! [ 115 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0000
BB_CPU_SN : 6BF3410C8B775D50CAA684F0F84D3574
BROM Protocol Version : 05
Setting...
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
InitRes : 00000000
DEV[0] : 2C00 CB00 1800 0000
DEV[1] : 0000 0000 0000 0000
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8B
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00EE , [Numonyx] N25W128
[0] : FLASH_DIE : 002C 00CB 0018 0000 
[0] : FLASH_LEN : 0x01000000
INT_RAM : 0x0000D000
EXT_RAM : 0x00800000
Reading Flash Content now ... 

Read Flash now
Read Ok , 16777216 bytes read
Check and collect compile info
File_Info   : J022_5_60A_BT_11B_PCB01_gprs_MT6260_S00.J022_5_60A_11B_240X320.bin
FileVersion : J022_5_60A_11B_240X320

[ScatCFG] : MT6260 / J022_5_60A_11B_240X320 / NOR , SF
Firmware saved to : D:\BST\infinty\CM2MTK\Read_out\J022_5_60A_BT_11B_PCB01_gprs_MT6260_S00\

Done!
Elapsed: 00:00:59
Reconnect Power/Cable!

download from here


nokia clone 220 4g Ta 1155 J022_5_60A_BT_11B_PCB01_gprs_MT6260_S00



if post helpful press thanks button

Thank you !

File transferred to Infinity support area