View Single Post
Old 12-22-2020, 11:57   #19 (permalink)
rexmike
Insane Poster
 
Join Date: Aug 2014
Posts: 99
Member: 2243791
Status: Offline
Thanks Meter: 9
sorry that was letter used to see if it will on back







Log file "C:\PROGRA~1\Octoplus\OCTOPL~1\LOG\21-12-2020_16-33-14.log" created.
12/21/2020 4:33:19 PM > Searching for server...
12/21/2020 4:33:22 PM > Trying to ping server...12/21/2020 4:33:22 PM > ok
12/21/2020 4:33:22 PM > Trying connect to server...
12/21/2020 4:33:30 PM > Searching installed cards...
12/21/2020 4:33:30 PM > Found card with s/n: 0000584C
12/21/2020 4:33:30 PM > Server check...
12/21/2020 4:33:33 PM > Server Check succesfull!
12/21/2020 4:33:33 PM > Server Check succesfull!
12/21/2020 4:33:34 PM > Welcome to Octoplus/Octopus Box LG Software version 3.0.7.06
12/21/2020 4:33:34 PM > Card S/N : 000000584C
12/21/2020 4:34:13 PM > INI FUpdateInfo Done!
12/21/2020 4:34:13 PM > INI FShowUpdateInfo start
12/21/2020 4:34:13 PM > INI FShowUpdateInfo 2
12/21/2020 4:38:39 PM > --------------------------------------------------------------------------------
12/21/2020 4:38:39 PM > Selected USB connection type
12/21/2020 4:38:41 PM > Transport: Connected
12/21/2020 4:38:44 PM > Authorized.
12/21/2020 4:38:48 PM > Work ID: 00000000004B7C69
12/21/2020 4:38:49 PM > Checking data...12/21/2020 4:38:50 PM > OK
12/21/2020 4:38:50 PM > Platform: LG MTK
12/21/2020 4:38:50 PM > Selected port: COM657
12/21/2020 4:38:50 PM > Selected baudrate: 0
12/21/2020 4:38:50 PM > Selected model: X120EMW
12/21/2020 4:38:50 PM > Please, disconnect cable, power phone OFF, connect P999 cable (with 910k resistor)
12/21/2020 4:38:50 PM > or
12/21/2020 4:38:50 PM > Power OFF phone, press and hold "Vol+" for 10 seconds and connect USB cable.
12/21/2020 4:39:21 PM > Phone found at port COM657
12/21/2020 4:39:21 PM > Mode: Emergency
12/21/2020 4:39:21 PM > Initializing flash...12/21/2020 4:39:23 PM > OK
12/21/2020 4:39:24 PM > Model ID: LGUS997
12/21/2020 4:39:24 PM > Incompatible model ID!
12/21/2020 4:39:30 PM > Canceled!
12/21/2020 4:39:30 PM > Performed by 3.0.7.06 Software version.
12/21/2020 4:39:30 PM > Elapsed Time: 12:00:50 AM
12/21/2020 4:40:48 PM > --------------------------------------------------------------------------------
12/21/2020 4:40:51 PM > Can not connect.
12/21/2020 4:40:51 PM > Error: €$
12/21/2020 4:40:51 PM > Please, select Reset FRP Method!
12/21/2020 4:40:59 PM > Checking data...12/21/2020 4:41:00 PM > OK
12/21/2020 4:41:00 PM > Platform: LG Qualcomm
12/21/2020 4:41:00 PM > Selected port: COM657
12/21/2020 4:41:00 PM > Selected model: US997
12/21/2020 4:41:00 PM > Please, put the phone into download mode manually (Power phone OFF, press and hold "Vol+" button and connect the cable).
12/21/2020 4:41:00 PM > Reading info...12/21/2020 4:41:00 PM > Failed!
12/21/2020 4:41:00 PM > Port busy
12/21/2020 4:41:00 PM > Performed by 3.0.7.06 Software version.
12/21/2020 4:41:00 PM > Elapsed Time: 12:00:12 AM
12/21/2020 4:41:12 PM > --------------------------------------------------------------------------------
12/21/2020 4:41:15 PM > Can not connect.
12/21/2020 4:41:15 PM > Error: $
12/21/2020 4:41:15 PM > Please, select Reset FRP Method!
12/21/2020 4:41:17 PM > Checking data...12/21/2020 4:41:18 PM > OK
12/21/2020 4:41:18 PM > Platform: LG Qualcomm
12/21/2020 4:41:18 PM > Selected port: COM657
12/21/2020 4:41:18 PM > Selected model: US997
12/21/2020 4:41:18 PM > Please, put the phone into download mode manually (Power phone OFF, press and hold "Vol+" button and connect the cable).
12/21/2020 4:41:18 PM > Reading info...
12/21/2020 4:41:20 PM > Model ID: LGUS997
12/21/2020 4:41:20 PM > IMEI: 355274-08-052429-3
12/21/2020 4:41:20 PM > Android version: 8.0.0
12/21/2020 4:41:20 PM > Battery level: 7%
12/21/2020 4:41:21 PM > Mode: Emergency
12/21/2020 4:41:21 PM > Initializing flash...12/21/2020 4:41:22 PM > OK
12/21/2020 4:41:23 PM > Platform: msm8996
12/21/2020 4:41:23 PM > SW version: 12/21/2020 4:41:23 PM > US99721e_01
12/21/2020 4:41:23 PM > Android version: 8.0.0
12/21/2020 4:41:23 PM > LAF Version: 1.1
12/21/2020 4:41:23 PM > Product ID: PT02S170624000930
12/21/2020 4:41:23 PM > IMEI: 355274-08-052429-3
12/21/2020 4:41:23 PM > Target operator: NAO
12/21/2020 4:41:23 PM > Hardware: rev_10
12/21/2020 4:41:23 PM > Reading partitions...12/21/2020 4:41:30 PM > OK
12/21/2020 4:41:30 PM > Reading BOOT...
12/21/2020 4:41:30 PM > ID: 0005F0E100310000
12/21/2020 4:41:30 PM > Operation is not safe and exist risk to damage the device!
Do You want to continue?12/21/2020 4:41:36 PM > OK
12/21/2020 4:41:37 PM > Backup saved to "US997_355274080524293_21-12-2020_16-41-36.oct"
12/21/2020 4:41:37 PM > Switching to Qualcomm 9008 mode...
12/21/2020 4:41:42 PM > Found port COM43
12/21/2020 4:41:42 PM > Connecting...12/21/2020 4:41:43 PM > OK
12/21/2020 4:41:43 PM > Sending loader...12/21/2020 4:42:07 PM > OK
12/21/2020 4:42:07 PM > Reconnecting phone...12/21/2020 4:42:08 PM > OK
12/21/2020 4:42:10 PM > Checking request...
12/21/2020 4:42:10 PM > Request has been successfully sent!
12/21/2020 4:42:10 PM > Obtaining response...12/21/2020 4:42:10 PM > OK
12/21/2020 4:42:11 PM > Reading partitions...
12/21/2020 4:42:11 PM > Sent 0 / 163
12/21/2020 4:42:11 PM > Sent 0 / 163
12/21/2020 4:42:11 PM > Sent 0 / 163
12/21/2020 4:42:11 PM > Sent 0 / 163
12/21/2020 4:42:12 PM > Sent 0 / 16312/21/2020 4:42:12 PM > Failed!
12/21/2020 4:42:12 PM > Rebooting phone...
12/21/2020 4:42:12 PM > Sent 0 / 96
12/21/2020 4:42:12 PM > Sent 0 / 96
12/21/2020 4:42:12 PM > Sent 0 / 96
12/21/2020 4:42:12 PM > Sent 0 / 96
12/21/2020 4:42:12 PM > Sent 0 / 96
12/21/2020 4:42:12 PM > Performed by 3.0.7.06 Software version.
12/21/2020 4:42:12 PM > Elapsed Time: 12:01:00 AM
12/21/2020 4:43:19 PM > --------------------------------------------------------------------------------
12/21/2020 4:43:22 PM > Can not connect.
12/21/2020 4:43:22 PM > Error: @‚<d
12/21/2020 4:43:22 PM > Please, select Reset FRP Method!
12/21/2020 4:43:23 PM > To perform Reset FRP operation do the next:
1. Attach testpoint as shown on Figure in manual, and connect phone with Micro USB cable.
2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008".
3. Release testpoint.

12/21/2020 4:43:23 PM > Found port COM43
12/21/2020 4:43:23 PM > Connecting...12/21/2020 4:43:24 PM > Failed!
12/21/2020 4:43:24 PM > Performed by 3.0.7.06 Software version.
12/21/2020 4:43:24 PM > Elapsed Time: 12:00:05 AM
12/21/2020 4:44:36 PM > --------------------------------------------------------------------------------
12/21/2020 4:44:39 PM > Transport: Connected
12/21/2020 4:44:44 PM > Authorized.
12/21/2020 4:44:53 PM > Work ID: 00000000004B7F72
12/21/2020 4:44:54 PM > Please, select Reset FRP Method!
12/21/2020 4:44:56 PM > To perform Reset FRP operation do the next:
1. Attach testpoint as shown on Figure in manual, and connect phone with Micro USB cable.
2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008".
3. Release testpoint.

12/21/2020 4:45:36 PM > Performed by 3.0.7.06 Software version.
12/21/2020 4:45:36 PM > Elapsed Time: 12:01:00 AM
 
 
Page generated in 0.11356 seconds with 7 queries