Quote:
Originally Posted by Medusa Box  Hello.
Please, check your PM. What is the exact state of your memory? How did You manage to damage it? |
Welcome to Medusa Pro Software version 2.1.8.
Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
Reader #1: Alcor Micro USB Smart Card Reader 1
Reader #2: FT SCR2000 0
Loading firmware. Please wait... Done.
Selected eMMC interface.
Your current activation is not fully compatible with present hardware and requires an upgrade. Some features may be disabled or slower than expected. Use Card Update Tool to activate your upgrade string.
Socket detected!
Selected BGA 153/169 socket.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 4 bits
Bus speed : 25 MHz
Connecting to server. Please wait...
Connection to server successful
Full speed mode!
Connecting...
Device : Samsung eMMC 000000
Page size : 512 B
Block size : 512 B
Block count : 1048576
Size : 512.00 MB
---------------------------------------------------------------
CID Info
CID : 150100303030303030562014031443C7
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : 000000
Product revision : 5.6
Product serial number : (hex) 20140314
Manufacturing date : 04/2016
---------------------------------------------------------------
CSD Info
CSD : 902701320F5903FFF6DB7FE08A40403B
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.5 (for MMC v4.41)
Erase block size : 512 Kbytes
Boot1 size : 512 Kbytes
Boot2 size : 512 Kbytes
RPMB size : 128 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 0 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/000000_14_01_2021_12_11_43.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.1.8; FW: 2.00.
Writing eMMC firmware from file: C:/Users/mesut/Desktop/klmag1jenb-b031 f ok/klmag1jenb-b031 f ok/ajnb3r_vnc0_00000000000000000000000000000000_7_0_r 1_15_27_22.bin...Done.
Finalizing...
Failed reconnect operation.
Sorry, my phone didn't work, can you help me please