View Single Post
Old 04-06-2021, 00:18   #2 (permalink)
sctikke
Junior Member
 
Join Date: Mar 2017
Age: 29
Posts: 39
Member: 2693967
Status: Offline
Thanks Meter: 6
Quote:
Originally Posted by sctikke View Post
eMMC_tool ver. 2.0.0.0 (release date: 30.12.2020)
Microsoft Windows 10 (64 bit) build 19042 (10.0.19041.804)

Looking for EasyJTAG box...
EasyJTAG API ver. 3403
EasyJTAG Box Serial = 0DF1DACCFF222422
Card Serial = AA944AD4
EasyJTAG Box Firmware = 2,5301

Changelog:
30/12/2020 (ver 1.6.4.0)

Add: New keys for Oppo unpack
Fix: Fix LG Parser
Fix: Bugs that have been found through your crash report

Add: new version 2.0.0.0 (qualcomm, samsung)

Operation: Connect to Z3X EasyJtagPlus

Setting Interface to EasyJtag2/E-Socket
Setting IO Levels to 2.8V
Setting Frequence to 42 Mhz
Setting BusWidth to Auto
Setting HS Timing to Enabled

EMMC Device Information :
EMMC CID: 150100335636434D420286B69031573F
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400D
Manufacturer: SAMSUNG , NAME: 3V6CMB , HEX: 335636434D42 , S/N: 3190B686 , Rev: 02
Manufacturer ID: 15 , OEM ID: 00 , Device Type: BGA (Discrete embedded) , Date: 5/2020
EMMC ROM 1 (Main User Data) Capacity: 119276 MB (0x001D1EC00000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (0x000000400000)
EMMC RPMB Capacity: 16384 KB (0x000001000000) , Counter: 2963 , Response: Not Clean
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot partition 1 enabled for boot , Boot ACK
Boot Bus Config: 0x02 , x8 (sdr/ddr) bus width in boot operation mode
H/W Reset Function [RST_N_FUNCTION]: 0x01 , RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition settings [PARTITION_SETTING_COMPLETED]: 0x00
EMMC Init completed
Backup saved: 3V6CMB_3190B686_20210406_070343.extcsd (new backup)

Connected successfully

Operation: Smart Report ...

Device Life Time Estimation (MLC) [269]: 0x01 0% - 10% device life time used
Device Life Time Estimation (SLC) [268]: 0x01 0% - 10% device life time used
Pre EOL information [267]: 0x01 Normal

Done

Operation: MoviNand Format + Reset ...

EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 KB
Sending Internal Reconfiguration Request... Waiting configuration Apply!

Restoring configuration...
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 KB
Wiping Card... Please do not touch it!

Successfully
Please don't forget to repair extCSD from backup

Operation: Repair Extcsd ...

Done

Operation: Remove WriteProtection ...

Error: This emmc does not have write protection

Operation: Scan PartitionTable from Source (Vendor: Binary Read/Write)

Scanning soft partitions from ROM2
GPT header is not found

Scanning soft partitions from ROM3
GPT header is not found

Scanning soft partitions from ROM1
GPT header is not found
MBR header is not found

Operation: Smart Report ...

Device Life Time Estimation (MLC) [269]: 0x01 0% - 10% device life time used
Device Life Time Estimation (SLC) [268]: 0x01 0% - 10% device life time used
Pre EOL information [267]: 0x01 Normal

Done

Operation: Random Check ...

If your restore data error occurs - the original data can be found in a folder:
\Backups\RandomCheck\20210406_070812\
Error writing at address: 000000000000 , error: -101, CARD Ready Timeout Error ... Retry #1
Error writing at address: 000000000000 , error: -101, CARD Ready Timeout Error ... Retry #2
Error writing at address: 000000000000 , error: -101, CARD Ready Timeout Error ... Retry #3
Address: 000000000000, size: 000000004000 - FAIL
Error writing at address: 000000000000 , error: -101, CARD Ready Timeout Error ... Retry #1
Error writing at address: 000000000000 , error: -101, CARD Ready Timeout Error ... Retry #2
Error writing at address: 000000000000 , error: -101, CARD Ready Timeout Error ... Retry #3

Write Speed - Max : 0,38 KB/s , Min : 0,38 KB/s , Avg : 0,38 KB/s , Slow blocks: 0 of 1 (0,00 %) , Verified: 16,00 KB
Read Speed - Max : 6515,19 KB/s , Min : 6515,19 KB/s , Avg : 6515,19 KB/s , Slow blocks: 0 of 1 (0,00 %) , Verified: 16,00 KB

Stopped by User request...

Sent from my SM-N950N using Tapatalk
I have xiaomi redmi note 9 merlin, restart after update ota.
Flash using many tool and firmware still restart.

Try to remove and check emmc,
But i dont know to write emmc xiaomi MTK using easy jtag, pliss help sir


Oyah, board without emmc ( after i remove emmc ) can detect emmc usb port on PC.

Sent from my SM-N950N using Tapatalk
  Reply With Quote
 
Page generated in 0.08264 seconds with 7 queries