| No Life Poster
Join Date: Mar 2015 Location: Islam Age: 35
Posts: 7,401
Member: 2371500
Status: Offline Thanks Meter: 5,804 | i solved the issue
this phone has 2 edition single sim RM 948 AND DUAL SIM RM 949
the sticker on phone was rm 948
while phone has 2 SIM CARD
I FLASHED PHONE WITH RM948 AND HAD DEAD PHONE
SO TODAY I TRIED V 10.34 FO RM 949
NOW PHONE OKI
SPECIAL THANKS TO MY BRO allttar
FOR HIS KIND AND GREAT HELP Quote:
Connect phone on selected interface...
Core : v2.29 , BB5XG FlashEngine : v10.5
Selected FlashSettings : Manual
Check FlashFiles, Please, wait...
Files Set for Flashing :
MCU : rm949__10.34_2.mcusw
PPM : rm949__10.34.ppm_q
CNT : rm949__10.34_2.image_q_059S5N1_059T368_208_05
Flashing phone now...
[Gen] Rules accepted for : XGOLD Generation
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
-> If Windows say "Unrecognized device" / Operation not start
-> Or if Phone start charge - just reinsert battery
-> If flashing freeze - reinsert cable/battery and try again
--- Press phone's power button or insert usb cable! ---
Connection opened successfully
IF Boot Init : 0xF0
IF Resp Len : 0x16
IF xCPUID : XGOLD 618 [XMM6180 QUARK]
IF uCHIPID : 50A9070100030101E010040940049752480E19B6FFFF
IF Resp Data : 50A9070100030101
Wait for user action : Insert battery
Sending EBL Loader ...
EBL Loader Ok
EBL Loader ready
Sending EBL ...
EBL sent Ok
EBL : QUARK_1340.100_M1S1
QUARK EEP config Ok
FLASHID : 20004000 , [ MuxOneNAND ]
Boot conf set, Target Ready
Boot done!
Backup enabled, will read all certificates
Reading CCC
Reading HWC
Reading NPC
IMEI 1 :
IMEI 2 :
Phone Product Code : 059T3C3
NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...
RPL saved : E:\BEST\Backup\Cert\3 7_XG618_CRT.rpl
===Flashing [MCU]===
Processing file : rm949__10.34_2.mcusw
Region count : 8
00 : [ PSI ] : psi_flash_unsigned.fls
01 : [ BCore ] : slb_signed.fls
02 : [ Code ] : main_toc_signed.fls
03 : [ Code ] : rm949__10.34.mcusw_signed_mcusw.fls
04 : [ Code ] : swap_signed.fls
05 : [ Cust ] : dynsw.fls
06 : [ Code ] : aeneas_signed.fls
07 : [ Code ] : fota_signed.fls
Parse done , flashing now
Flash : 00 : psi_flash_unsigned.fls
Sending Sec-Pack
SecInfo Area : 0x0000 , SecInfo Len : 0x0800
Erase area 0x00 , Start 0x00090000 , Len : 0x00020000
Erase now...
Erase done
Region Start : 0x00090000 , Data Len : 0x00010FB0
Region Load done
Write done
psi_flash_unsigned.fls image flash done
Flash : 01 : slb_signed.fls
Sending Sec-Pack
SecInfo Area : 0x0001 , SecInfo Len : 0x0800
Erase area 0x00 , Start 0x60000000 , Len : 0x00040000
Erase now...
Erase done
Region Start : 0x60000000 , Data Len : 0x00040000
Region Load done
Write done
slb_signed.fls image flash done
Flash : 02 : main_toc_signed.fls
Sending Sec-Pack
SecInfo Area : 0x0002 , SecInfo Len : 0x0800
Erase area 0x00 , Start 0x60040000 , Len : 0x00000400
Erase now...
Erase done
Region Start : 0x60040000 , Data Len : 0x00000400
Region Load done
Write done
main_toc_signed.fls image flash done
Flash : 03 : rm949__10.34.mcusw_signed_mcusw.fls
Sending Sec-Pack
SecInfo Area : 0x0003 , SecInfo Len : 0x0800
Erase area 0x00 , Start 0x62E00000 , Len : 0x01100000
Erase now...
Erase done
Erase area 0x01 , Start 0xFFF00000 , Len : 0x00080000
Erase now...
Erase done
Region Start : 0x62E00000 , Data Len : 0x00F5CAC4
Region Load done
Write done
rm949__10.34.mcusw_signed_mcusw.fls image flash done
Flash : 04 : swap_signed.fls
Sending Sec-Pack
SecInfo Area : 0x0004 , SecInfo Len : 0x0800
Erase area 0x00 , Start 0x80000000 , Len : 0x00F00000
Erase now...
Erase done
Region Start : 0x80000000 , Data Len : 0x00C2E6C4
Region Load done
Write done
swap_signed.fls image flash done
Flash : 05 : dynsw.fls
Sending Sec-Pack
SecInfo Area : 0x0005 , SecInfo Len : 0x0800
Erase area 0x00 , Start 0x62080000 , Len : 0x00100000
Erase now...
Erase done
Region Start : 0x62080000 , Data Len : 0x00044000
Region Load done
Write done
dynsw.fls image flash done
Flash : 06 : aeneas_signed.fls
Sending Sec-Pack
SecInfo Area : 0x0006 , SecInfo Len : 0x0800
Erase area 0x00 , Start 0x63F79C00 , Len : 0x00080000
Erase now...
Erase done
Region Start : 0x63F79C00 , Data Len : 0x00046870
Region Load done
Write done
aeneas_signed.fls image flash done
Flash : 07 : fota_signed.fls
Sending Sec-Pack
SecInfo Area : 0x0007 , SecInfo Len : 0x0800
Erase area 0x00 , Start 0x61F00004 , Len : 0x0017FFFC
Erase now...
Erase done
Region Start : 0x61F00004 , Data Len : 0x00149A90
Region Load done
Write done
fota_signed.fls image flash done
===Flashing [PPM]===
Processing file : rm949__10.34.ppm_q
Region count : 1
00 : [ Cust ] : package_q.ppm_ebl_psi.fls
Parse done , flashing now
Flash : 00 : package_q.ppm_ebl_psi.fls
Sending Sec-Pack
SecInfo Area : 0x0000 , SecInfo Len : 0x0800
Erase area 0x00 , Start 0x80F00000 , Len : 0x00B00000
Erase now...
Erase done
Region Start : 0x80F00000 , Data Len : 0x006D3220
Region Load done
Write done
package_q.ppm_ebl_psi.fls image flash done
===Flashing [CNT]===
Processing file : rm949__10.34_2.image_q_059S5N1_059T368_208_05
Region count : 1
00 : [ Cust ] : rm949__10.34.image_q_059S5N1_059T368_208_05.fls
Parse done , flashing now
Flash : 00 : rm949__10.34.image_q_059S5N1_059T368_208_05.fls
Sending Sec-Pack
SecInfo Area : 0x0000 , SecInfo Len : 0x0800
Erase area 0x00 , Start 0xA1000000 , Len : 0x0C580000
Erase now...
Erase done
Erase area 0x01 , Start 0xAE000000 , Len : 0x00300000
Erase now...
Erase done
Region Start : 0xA1000000 , Data Len : 0x02143800
Region Load done
Write done
rm949__10.34.image_q_059S5N1_059T368_208_05.fls image flash done
Flashing done!
Total flash time : 00:00:13
Reboot phone now...
Reading Phone Info....
Connected phone - Nokia 208 Dual SIM
Software Info: V 10.34 13-03-14 RM-949 (c) Nokia
IMEI:
PPM version : V 10.34 13-03-14 RM-949 (c) Nokia Q
Product code: 059T3C3
Wait, when phone will be ready ...
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Processing After Flash Defaults...
FullFactorySet... Ok!
UserDataDefaultsSet...OK!
ServiceDefaultsSet... Ok!
LeaveDefaultsSet... Ok!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Resetting LifeTimer
Reset Done!
Check and Upload User Certificates ...
Total - 58 certs
Certificates found, skip upload ...
===== WARNING =====
Battery voltage is NOT enough for start
===== WARNING =====
Set phone to Normal mode...
AfterFlash operations done ;D
Done!
Connect phone on selected interface...
Elapsed: 00:01:11
Connect phone on selected interface...
Phone found!
Series 40 Device detected!
read info... - Ok
Phone disconected!
Connect phone on selected interface...
Phone found!
Series 40 Device detected!
read info... - Ok
Phone disconected!
Connect phone on selected interface...
Core : v2.29 , BB5XG FlashEngine : v10.5
Selected FlashSettings : Manual
Check FlashFiles, Please, wait...
Files Set for Flashing :
MCU : rm949__10.34.mcusw
PPM : rm949__10.34.ppm_m3
CNT : rm949__10.34.image_m3_059S5K9
Flashing phone now...
[Gen] Rules accepted for : XGOLD Generation
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
-> If Windows say "Unrecognized device" / Operation not start
-> Or if Phone start charge - just reinsert battery
-> If flashing freeze - reinsert cable/battery and try again
--- Press phone's power button or insert usb cable! ---
Connection opened successfully
IF Boot Init : 0xF0
IF Resp Len : 0x16
IF xCPUID : XGOLD 618 [XMM6180 QUARK]
IF uCHIPID : 50A9070100030101E010040940049752480E19B6FFFF
IF Resp Data : 50A9070100030101
Wait for user action : Insert battery
Sending EBL Loader ...
EBL Loader Ok
EBL Loader ready
Sending EBL ...
EBL sent Ok
EBL : QUARK_1340.100_M1S1
QUARK EEP config Ok
FLASHID : 20004000 , [ MuxOneNAND ]
Boot conf set, Target Ready
Boot done!
Backup enabled, will read all certificates
Reading CCC
Reading HWC
Reading NPC
IMEI 1 :
IMEI 2 :
Phone Product Code : 059T3C3
NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...
RPL saved : E:\BEST\Backup\Cert\3 _2nd_XG618_CRT.rpl
===Flashing [MCU]===
Processing file : rm949__10.34.mcusw
Region count : 8
00 : [ PSI ] : psi_flash_unsigned.fls
01 : [ BCore ] : slb_signed.fls
02 : [ Code ] : main_toc_signed.fls
03 : [ Code ] : rm949__10.34.mcusw_signed_mcusw.fls
04 : [ Code ] : swap_signed.fls
05 : [ Cust ] : dynsw.fls
06 : [ Code ] : aeneas_signed.fls
07 : [ Code ] : fota_signed.fls
Parse done , flashing now
Flash : 00 : psi_flash_unsigned.fls
Sending Sec-Pack
SecInfo Area : 0x0000 , SecInfo Len : 0x0800
Erase area 0x00 , Start 0x00090000 , Len : 0x00020000
Erase now...
Erase done
Region Start : 0x00090000 , Data Len : 0x00010FB0
Region Load done
Write done
psi_flash_unsigned.fls image flash done
Flash : 01 : slb_signed.fls
Sending Sec-Pack
SecInfo Area : 0x0001 , SecInfo Len : 0x0800
Erase area 0x00 , Start 0x60000000 , Len : 0x00040000
Erase now...
Erase done
Region Start : 0x60000000 , Data Len : 0x00040000
Region Load done
Write done
slb_signed.fls image flash done
Flash : 02 : main_toc_signed.fls
Sending Sec-Pack
SecInfo Area : 0x0002 , SecInfo Len : 0x0800
Erase area 0x00 , Start 0x60040000 , Len : 0x00000400
Erase now...
Erase done
Region Start : 0x60040000 , Data Len : 0x00000400
Region Load done
Write done
main_toc_signed.fls image flash done
Flash : 03 : rm949__10.34.mcusw_signed_mcusw.fls
Sending Sec-Pack
SecInfo Area : 0x0003 , SecInfo Len : 0x0800
Erase area 0x00 , Start 0x62E00000 , Len : 0x01100000
Erase now...
Erase done
Erase area 0x01 , Start 0xFFF00000 , Len : 0x00080000
Erase now...
Erase done
Region Start : 0x62E00000 , Data Len : 0x00F5CAC4
Region Load done
Write done
rm949__10.34.mcusw_signed_mcusw.fls image flash done
Flash : 04 : swap_signed.fls
Sending Sec-Pack
SecInfo Area : 0x0004 , SecInfo Len : 0x0800
Erase area 0x00 , Start 0x80000000 , Len : 0x00F00000
Erase now...
Erase done
Region Start : 0x80000000 , Data Len : 0x00C2E6C4
Region Load done
Write done
swap_signed.fls image flash done
Flash : 05 : dynsw.fls
Sending Sec-Pack
SecInfo Area : 0x0005 , SecInfo Len : 0x0800
Erase area 0x00 , Start 0x62080000 , Len : 0x00100000
Erase now...
Erase done
Region Start : 0x62080000 , Data Len : 0x00044000
Region Load done
Write done
dynsw.fls image flash done
Flash : 06 : aeneas_signed.fls
Sending Sec-Pack
SecInfo Area : 0x0006 , SecInfo Len : 0x0800
Erase area 0x00 , Start 0x63F79C00 , Len : 0x00080000
Erase now...
Erase done
Region Start : 0x63F79C00 , Data Len : 0x00046870
Region Load done
Write done
aeneas_signed.fls image flash done
Flash : 07 : fota_signed.fls
Sending Sec-Pack
SecInfo Area : 0x0007 , SecInfo Len : 0x0800
Erase area 0x00 , Start 0x61F00004 , Len : 0x0017FFFC
Erase now...
Erase done
Region Start : 0x61F00004 , Data Len : 0x00149A90
Region Load done
Write done
fota_signed.fls image flash done
===Flashing [PPM]===
Processing file : rm949__10.34.ppm_m3
Region count : 1
00 : [ Cust ] : package_m3.ppm_ebl_psi.fls
Parse done , flashing now
Flash : 00 : package_m3.ppm_ebl_psi.fls
Sending Sec-Pack
SecInfo Area : 0x0000 , SecInfo Len : 0x0800
Erase area 0x00 , Start 0x80F00000 , Len : 0x00B00000
Erase now...
Erase done
Region Start : 0x80F00000 , Data Len : 0x005316A8
Region Load done
Write done
package_m3.ppm_ebl_psi.fls image flash done
===Flashing [CNT]===
Processing file : rm949__10.34.image_m3_059S5K9
Region count : 1
00 : [ Cust ] : package_m3_059S5K9.image.fls
Parse done , flashing now
Flash : 00 : package_m3_059S5K9.image.fls
Sending Sec-Pack
SecInfo Area : 0x0000 , SecInfo Len : 0x0800
Erase area 0x00 , Start 0xA1000000 , Len : 0x0C580000
Erase now...
Erase done
Erase area 0x01 , Start 0xAE000000 , Len : 0x00300000
Erase now...
Erase done
Region Start : 0xA1000000 , Data Len : 0x02121A00
Region Load done
Write done
package_m3_059S5K9.image.fls image flash done
Flashing done!
Total flash time : 00:00:12
Reboot phone now...
Reading Phone Info....
Connected phone - Nokia 208 Dual SIM
Software Info: V 10.34 13-03-14 RM-949 (c) Nokia
IMEI:
PPM version : V 10.34 13-03-14 RM-949 (c) Nokia M3
Product code: 059T3C3
Wait, when phone will be ready ...
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Processing After Flash Defaults...
FullFactorySet... Ok!
UserDataDefaultsSet...OK!
ServiceDefaultsSet... Ok!
LeaveDefaultsSet... Ok!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Resetting LifeTimer
Check phone mode...
Phone in Test mode
Seting Local mode... wait...
Local mode set
Reset Done!
Check and Upload User Certificates ...
Total - 58 certs
Certificates found, skip upload ...
===== WARNING =====
Battery voltage is can be not enough for start
===== WARNING =====
Set phone to Normal mode...
AfterFlash operations done ;D
Done!
Connect phone on selected interface...
Elapsed: 00:01:34
Connect phone on selected interface...
|
Last edited by profkefah; 04-10-2021 at 10:24.
|