tecno ke6 frp one click done with umt mtk one click tab. Operation : MTK One Click
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM48
Port Name: MediaTek PreLoader USB VCOM_V1632 (Android) (COM48)
Path: \\?\usb#vid_0e8d&pid_2000#5&2889b90e&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Preloader Mode Detected, Trying to crash...
- Success!
Port: COM6
Port Name: MediaTek USB Port_V1632 (COM6)
Path: \\?\usb#vid_0e8d&pid_0003#5&2889b90e&0&1#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0717, [MT6761]
Hardware Info: 0x8A00, 0xCA01, 0x200
SecureBoot: True
SLA: False
DA Auth: True
Disabling WatchDog...
- Success
Sending Payload data...
- Payload sent
Initiating Control Transfer...
- Done
Waiting for result...
- Result: 0xA1A2A3A4
Disable Auth Success
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port_V1632 (COM6)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Executing Flashing Task...
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Device Information...
Platform : MT6761
Board : TECNO-KE6
Platform : mt6761
Userdata is ENCRYPTED
Seeking FRP Data...
Resetting FRP...
- Success!
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 4.2] |