HuAWEI P30 PRO VOG-L09 FRP REMOVED FREE WITH TP
Quote:
Welcome to Octoplus Huawei Software v.1.2.4
To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode
To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode
To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'
Found COM ports:
Job ID: 0000000000FB6ED2
2021-05-10 14:21:07 GMT -------------------------------------------------
Starting Reset FRP (Factory Mode)
Selected phone model: VOG-L29
Username:
Warning: Invalid username
Reset FRP (Factory Mode) failed.
Performed by 1.2.4 Software version.
Your balance: 30 credit(s)
Job ID: 0000000000FB6EF4
2021-05-10 14:21:34 GMT -------------------------------------------------
Starting Reset FRP (Factory Mode)
Selected phone model: VOG-L29
Username: octoplus888
Connecting to the credit server...
Searching HUAWEI USB COM 1.0 port...
Detected HUAWEI USB COM 1.0 port
Writing bootloader KIRIN980_V1...
Initializing remote service connection...
Writing XLOADER partition...
Writing UCE partition...
Writing FASTBOOT partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found a fastboot device: 026AYU199C013050
Device Model: VOG-L09
System: VOG-L09 11.0.0.138(C431E8R2P3)
Checking balance...
Your balance: 30 credits
Sending device information...
Sending firmware information...
To perform this operation you need to have: 0 credits.
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: UNLOCKED
User Lock State: LOCKED
Device Model: VOG-L09
System: VOG-L09 11.0.0.138(C431E8R2P3)
Resetting FRP...
Writing FRP partition..
Rebooting device...
Reset FRP (Factory Mode) done.
Performed by 1.2.4 Software version.
|