Huawei psmart FIG-LX1 UNLOCK WITH TP
Quote:
Welcome to Octoplus Huawei Software v.1.2.4.3
To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode
To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode
To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'
Found COM ports:
2021-05-14 14:37:12 GMT -------------------------------------------------
Starting Connect
Selected phone model: FIG-LX1
Searching HUAWEI USB COM 1.0 port...
Error: HUAWEI USB COM 1.0 port not found
Searching Fastboot devices...
Found a fastboot device: HBEDU18904002537
Detected Android Sooner Single ADB Interface port
Device Model: FIG-LX1
System: FIG-LX1 9.1.0.171(IRLC368E8R1P5)
MEID: 00000000000000
IMEI A: 869012036776859
IMEI B: 000000000000000
S/N: HBEDU18904002537
FB Lock State: UNLOCKED
User Lock State: LOCKED
Connect done.
Performed by 1.2.4.3 Software version.
2021-05-14 14:37:46 GMT -------------------------------------------------
Starting Direct Unlock
Selected phone model: FIG-LX1
Connecting to server...
Saving backup of MODEM_SECURE...
Initializing remote service connection...
Downloading unlock patch files...
Error: Can't get file ImeiFile_I1.bin!
Error: Can't get file ImeiFile_I1.hash!
Writing MODEM_SECURE partition...
Rebooting device...
Direct Unlock done.
Performed by 1.2.4.3 Software version.
|