| Z3X EasyJtag Software ver. 3.7.0.23
UFS Socket Info.
Serial: 01235F9DD53Axxxxxx
Description: EasyJTAG UFS Socket BGA-254 by EasyJTAG 02.04.20
Identify UFS Chip.
UFS Chip Voltage: High
VCC: 3308mV
VCCQ2: 1940mV
Chip Info:
Manufacturer: MICRON
ProductName: MT064GASAO2U21
SerialNumber: 0x1715F01A167272102000
OemID: MICRON
Firmware Version: 1.09
UFS Version: 2.1
Maximum Number of LUs: 32
Number of LUs found: 6
LUN 0:
Block size: 0x1000
Size: 0xE41800000 / 57,024,000,000B / 57GB
LUN 1 (Boot A):
Block size: 0x1000
Size: 0x800000 / 0,008,000,000B / 8MB
LUN 2 (Boot B):
Block size: 0x1000
Size: 0x800000 / 0,008,000,000B / 8MB
LUN 3:
Block size: 0x1000
Size: 0x2000000 / 0,032,000,000B / 32MB
LUN 4:
Block size: 0x1000
Size: 0x84800000 / 2,072,000,000B / 2GB
LUN 5:
Block size: 0x1000
Size: 0x1C000000 / 0,448,000,000B / 448MB
Number of W-LUs found: 1
W-LUN 0xC4 (RPMB):
Block size: 0x100
Size: 0x1000000 / 0,016,000,000B / 16MB
Full size: 0xEE7000000 / 59,624,000,000B / 59GB
RPMB:
Counter: 10615
Health:
Device life time method A: 0x01 (0%-10% device life time used)
Device life time method B: 0x01 (0%-10% device life time used)
Pre End of Life: 0x01 (Used less then 80% of reserved blocks)
Can't stop LU, Code: -406, Reason: UAP SCSI: Command sense: UNIT_ATTENTION
Done.
i try with EFM but not read the chip, only easy jtag classic but mark this error RESET OPPO |