Huawei DUB-LX3 (Y7 2017) FRP successfully Removed by Hydra Tool 1. Run Qualcomm Hydra Tool.
2. Choose "Brand" and "Module".
3. Go to "Service"--> "Huaweil"
4. Choose "Factory Reset" from drop down menu.
5. Chose "FRP" from using Flash Mode.
6. Click "Execute".
7. Connect Device to computer using USB Data Cable.
8. Wait until the operation is completed.
Screen Short: 
Logs: Quote:
PreOperation Configuration
Brand : HUAWEI Model : DUB-LX3 (Y7 2019) Storage : Auto
Loader: prog_emmc_firehose_11.mbn
Port : Auto
Connection :
Searching for Qualcomm 9008 Device...Found
FriendlyName :Qualcomm HS-USB QDLoader 9008 (COM28)
SymbolicName :\??\USB#VID_05C6&PID_9008#5&2f3fe3a6&0&2#{a5dcbf1 0-6530-11d2-901f-00c04fb951ed}
Driver Ver :03/19/2014,2.1.1.2
Getting device info..Ok
Device MODE : Firehose
Connecting to Firehose...
Ping.. Ok
Configuration.......
Identifying Chip....
Ok
Chip Configuration :
MemoryName : eMMC
MaxPayloadSizeToTargetInBytes : 16384
MaxPayloadSizeToTargetInBytesSupported : 16384
MaxPayloadSizeFromTargetInBytes : 4096
MaxXMLSizeInBytes : 4096
TargetName : 8953
Version : 1
*** STORAGE DEVICE INFO ***
Memory Type : eMMC
Block Size in Bytes : 512
Page Size : 512
Manufacturer ID : 144
Serial Number : 3163846
Firmware Version : 0
Product Name : hC9aP3
Physical Partitions : 3
Total Logical Blocks:
Drive [0] 122142720[58.242 GB]
Drive [1] 8192[4 MB]
Drive [2] 8192[4 MB]
Protocol : Universal
Running : Ok
Reading GPT[3]
Drive [0] 60 Items
Drive [1] 0 Items
Drive [2] 0 Items
Processing Remove FRP....
- Removing FRP [Zero Wipe] Ok
Action Result : Ok
Elapsed Time : 00:00:05
|
BR
Dipendra Pathak