| Operation : Flash Firmware [ v2.13 ]
Setting : Update NVRAM : True
Setting : Force NVRAM : True
Setting : Update PMT : True
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : PAC : W6502-F3108-10.0-OP-V028-20210304_1620_user.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : SEC : RSA auth required!
FDL : Process authentification ...
FDL : SEC : RSA auth passed!
FDL : Control transfered!
Boot Done!
PMTMng : Load PMT
PMTMng : 0x28
PMTMng : Update PMT Ok!
NVRM : pike2_pubcp_PLD_base_nv_nvitem.bin
NVMng : Load 0x17
NVMng : Init SRC
NVMng : SecurityInfo
IMEI[1] : 350729342520921
IMEI[2] : 350729342520939
IMEI[3] : 867400020316638
WIFIMAC : FFFFFFFFFFFF
BT_MAC : FFFFFFFFFFFF
SEC : SLS:0, SKS:0, SKV:4
NVMng : Backup Ok , 0x00066B28
NVMng : Init DST
NVMng : Rx11 : Wx10
NVMng : NVM block updated!
Prepare target ...
Prepare Ok!
CODE : logo.bmp
ERASE : UBOOT
FSIMG : cache.img
CODE : cover.img
CODE : dtbo.img
CODE : SC9600_pike2_pubcp_PLD_base_nv_modem.dat
CODE : tos-sign.bin
CODE : boot.img
ERASE : W_RUNTIMENV1
CODE : recovery.img
ERASE : SYSDUMPDB
FSIMG : socko.img
CODE : sml-sign.bin
CODE : vbmeta_vendor.img
CODE : delta_nv.bin
FSIMG : itel.img
ERASE : METADATA
CODE : pike2_cm4.bin
CODE : PIKE2_DM_DSP.bin
CODE : logo.bmp(1)
CODE : vbmeta-sign.img
ERASE : MISC
FSIMG : userdata.img
UBOOT : u-boot-spl-16k-sign.bin
ERASE : UBOOT_LOG
CODE : PM_pike2_cm4_v2.bin
FSIMG : super.img
UBOOT : u-boot-sign.bin
FSIMG : odmko.img
CODE : prodnv.img
CODE : gnssbdmodem.bin
FSIMG : persist.img
CODE : gnssmodem.bin
CODE : vbmeta_system.img
Flashing finished!
Reconnect Power/Cable!
Done!
Elapsed: 00:02:29
Thanks Sir Jay Di as you can see on logs, it worked like a charm!!!!. Keep the good work team. You always offer world first solution like no other in GSM.
Itel W6501 |