https://www.youtube.com/watch?v=ynub...FO%2CTRAVELFIT
(GSM INFO) HUAWEI NOVA 7 SE 5G (CDY-AN20) FRP GMAIL ACCOUNT REMOVED OCTOPLUS (FIT)
Quote:
Welcome to Octoplus Huawei Software v.?1.2.5?
To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode
To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode
To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'
Found COM ports:
1: COM1 Communications Port
2021-05-03 14:55:07 GMT -------------------------------------------------
Starting ON/OFF Factory Mode
Selected phone model: ?CDY-AN90?
To Enable Factory mode put the phone in Upgrade mode and connect USB cable!
To Disable Factory mode connect the phone in Factory mode or Factory Fastboot mode!
Error: No devices to ON/OFF factory mode!
ON/OFF Factory Mode failed.
Performed by ?1.2.5? Software version.
2021-05-03 14:55:31 GMT -------------------------------------------------
Starting ON/OFF Factory Mode
Selected phone model: ?CDY-AN90?
To Enable Factory mode put the phone in Upgrade mode and connect USB cable!
To Disable Factory mode connect the phone in Factory mode or Factory Fastboot mode!
Error: No devices to ON/OFF factory mode!
ON/OFF Factory Mode failed.
Performed by ?1.2.5? Software version.
2021-05-03 14:55:56 GMT -------------------------------------------------
Starting ON/OFF Factory Mode
Selected phone model: ?CDY-AN90?
To Enable Factory mode put the phone in Upgrade mode and connect USB cable!
To Disable Factory mode connect the phone in Factory mode or Factory Fastboot mode!
Error: No devices to ON/OFF factory mode!
ON/OFF Factory Mode failed.
Performed by ?1.2.5? Software version.
2021-05-03 14:57:22 GMT -------------------------------------------------
Starting ON/OFF Factory Mode
Selected phone model: ?CDY-AN90?
To Enable Factory mode put the phone in Upgrade mode and connect USB cable!
To Disable Factory mode connect the phone in Factory mode or Factory Fastboot mode!
Checking the existence of the auto firmware file...
Error: Resource file does not exist
Error: Resource file does not exist
Warning: Switching your device to Factory Mode is not possible! Please, connect your device via Test Point and perform the desired operation.
ON/OFF Factory Mode failed.
Performed by ?1.2.5? Software version.
2021-05-03 14:57:36 GMT -------------------------------------------------
Starting ON/OFF Factory Mode
Selected phone model: ?CDY-NX9?
To Enable Factory mode put the phone in Upgrade mode and connect USB cable!
To Disable Factory mode connect the phone in Factory mode or Factory Fastboot mode!
Checking the existence of the auto firmware file...
Error: Resource file does not exist
Error: Resource file does not exist
Warning: Switching your device to Factory Mode is not possible! Please, connect your device via Test Point and perform the desired operation.
ON/OFF Factory Mode failed.
Performed by ?1.2.5? Software version.
2021-05-03 14:58:41 GMT -------------------------------------------------
Starting ON/OFF Factory Mode
Selected phone model: ?CDY-NX9?
To Enable Factory mode put the phone in Upgrade mode and connect USB cable!
To Disable Factory mode connect the phone in Factory mode or Factory Fastboot mode!
Checking the existence of the auto firmware file...
Error: Resource file does not exist
Error: Resource file does not exist
Warning: Switching your device to Factory Mode is not possible! Please, connect your device via Test Point and perform the desired operation.
ON/OFF Factory Mode failed.
Performed by ?1.2.5? Software version.
2021-05-03 15:11:17 GMT -------------------------------------------------
Starting Connect
Selected phone model: ?CDY-AN90?
Searching HUAWEI USB COM 1.0 port...
Detected ?HUAWEI USB COM 1.0? port
Writing bootloader KIRIN820_V1...
Initializing remote service connection...
Writing ?XLOADER? partition...
Writing ?UCE? partition...
Writing ?FASTBOOT? partition...
Writing ?BL2? partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found a fastboot device: 0123456789ABCDEF
Detected ?Android Sooner Single ADB Interface? port
Device Model: ?CDY-AN20?
System: ?CDY-AN20 10.1.1.210(C00E210R6P3)?
FB Lock State: ?LOCKED?
User Lock State: ?LOCKED?
Connect done.
Performed by ?1.2.5? Software version.
2021-05-03 15:12:41 GMT -------------------------------------------------
Starting Reset FRP (Factory Mode)
Selected phone model: ?CDY-AN90?
Username:
Warning: Invalid username
Reset FRP (Factory Mode) failed.
Performed by ?1.2.5? Software version.
Your balance: 30 credit(s)
2021-05-03 15:13:26 GMT -------------------------------------------------
Starting Reset FRP (Factory Mode)
Selected phone model: ?CDY-AN90?
Username: octoplus888
Connecting to the credit server...
Searching HUAWEI USB COM 1.0 port...
Error: HUAWEI USB COM 1.0 port not found
Reset FRP (Factory Mode) failed.
Performed by ?1.2.5? Software version.
2021-05-03 15:14:48 GMT -------------------------------------------------
Starting Reset FRP (Factory Mode)
Selected phone model: ?CDY-AN90?
Username: octoplus888
Connecting to the credit server...
Searching HUAWEI USB COM 1.0 port...
Detected ?HUAWEI USB COM 1.0? port
Writing bootloader KIRIN820_V1...
Initializing remote service connection...
Writing ?XLOADER? partition...
Writing ?UCE? partition...
Writing ?FASTBOOT? partition...
Writing ?BL2? partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found a fastboot device: 0123456789ABCDEF
Device Model: ?CDY-AN20?
System: ?CDY-AN20 10.1.1.210(C00E210R6P3)?
Checking balance...
Your balance: 30 credits
Sending device information...
Sending firmware information...
To perform this operation you need to have: 0 credits.
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ?UNLOCKED?
User Lock State: ?LOCKED?
Device Model: ?CDY-AN20?
System: ?CDY-AN20 10.1.1.210(C00E210R6P3)?
MEID: ?A00000BA6E0C07?
IMEI A: ?868729059938675?
IMEI B: ?865049050006684?
Resetting FRP...
Writing FRP partition..
Rebooting device...
Reset FRP (Factory Mode) done.
Performed by ?1.2.5? Software version.
|