[Dipendra Pathak]

HiSilicon Huawei STK-L22 (Y9 Prime 2019) FRP removed using Fastboot by Hydra Tool

1. Run Main Tool of Hydra.
2. Choose "HiSilicon" Tab.
3. Choose Module
4. Go to "Service" and choose "Factory reset protection" from drop down menu.
5. Choose "Remove FRP"
6. Keep (Put) the device into Fastboot mode.
7. Connect device to the computer with USB Data Cable.
8. Click on "Execute"
9. Wait until the operation is complete.
Note: Auto boot and manual boot is optional. If you want auto boot, then, just tick it.

Screen Short:



Logs:

Searching Device By Fastboot
Device Found...

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Reading Device Information...
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
hotainfo......
#hotainfo_len : 0x0000005D
#C_version : C636
#D_version : D000
#PLMN : 51502
#BoardID : 7551
#DeviceName : STK-L22
Build number : STK-L22 10.0.0.382(C636E6R2P2)
Product Model : STK-L22
hwnff_ver : Ver2.3
key_version : huawei_key_v1
product : kirin710
system_update_state :
vendorcountry : hw/spcseas
soc_id :
build_fingerprint :
build_version_full :
build_version_qcom : \par
psid.........
#SN :
#IMEI1 :
#IMEI2 :

Security Info....
#Dongle_info : RSA-2048,0x9001,0x7000,0x6000,0x5100,0x5000
#FB Lock State : UNLOCKED
#USER Lock State : LOCKED

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Huawei Fastboot Service...
Factory Reset Protection...
Removing.... Ok

Elapsed Time : 00:00:01

BR
Dipendra Pathak