GSM-Forum - View Single Post - How to Install Hydra driver, run its Applications & facing problem while installing

**Dipendra Pathak** · 07-03-2021, 11:02

Solution of Flashing Fail!

If you get the problem regarding flashing fail; please re-flash after applying each option :

1. Use latest Hydra Software.
You can update hydra software from HUM Tool.

2. Flashing can be fail because old device (cellphone) drivers
Check the latest driver from here :
https://www.hydra-dongle.com/drivers/

3. Flashing can be fail because unknown about devices (Hydra Tool)
Check the manual of Hydra Tool :
https://www.hydra-dongle.com/help/

a) Click "Main" if you need manual of Hydra MAIN Tool
b) Click "Qualcomm" if you need manual of Hydra Qualcomm Tool
c) Click "MTK" if you need manual of Hydra MTK Tool
d) Click "SPREADTRUM" if you need manual of SPREADTRUM Tool
e) Click "Test Point" if you need help regarding TEST POINT

4. Untick "Auto Backup" and try to re-flash again

5. Try to load manual loader, after unticking "Auto Loader"

6. Tick "Format before Format"

7. You can tick or untick "Enable Write Preloader"

8. If you see error "Change to HIGH SPEED..." ,then,
Untick "Enable High Speed" from "Configuration" tab at bottom down of
Hydra Tool.

9. If you see error "Device is not sahara", then, Check the link:
https://forum.gsmhosting.com/vbb/14370290-post19.html

10. If you see error "Device is not in Firehouse Mode", then, check:
https://forum.gsmhosting.com/vbb/14370286-post18.html

11. If you see error "STATUS_SEC_IMG_TYPE_MISMATCH", then, check the
link : https://forum.gsmhosting.com/vbb/14371599-post20.html

12. If you see error "PurgeComm function fail (Error 5)", then, check the
link: https://forum.gsmhosting.com/vbb/14376119-post21.html

13. If you see the error "Please filter the device.....and run exploid again",
then, visit:
https://forum.gsmhosting.com/vbb/14330300-post15.html

14. Some device need to read system info before you do any operation, so,
do it first "Read System info"

15. Some device does not go in different mode, then, do it manually as
below :

a) Meta Mode / Broom Mode :
https://forum.gsmhosting.com/vbb/14322405-post12.html

b) Fastboot Mode:
https://forum.gsmhosting.com/vbb/14323205-post14.html

c) Preloader mode:
https://forum.gsmhosting.com/vbb/14323168-post13.html

d) download mode (Samsung etc):
Vol Down + Power

e) Reset mode (Samsung etc)
Vol up + Power

Good Luck!

BR
Dipendra Pathak

07-03-2021, 11:02	#22 (permalink)
Dipendra Pathak Product Manager Join Date: Apr 2008 Location: Whitehole throught Blackhole! Posts: 9,582 Member: 747989 Status: Offline Sonork: 100.1593052 Thanks Meter: 8,621	Solution of Flashing Fail! Solution of Flashing Fail! If you get the problem regarding flashing fail; please re-flash after applying each option : 1. Use latest Hydra Software. You can update hydra software from HUM Tool. 2. Flashing can be fail because old device (cellphone) drivers Check the latest driver from here : https://www.hydra-dongle.com/drivers/ 3. Flashing can be fail because unknown about devices (Hydra Tool) Check the manual of Hydra Tool : https://www.hydra-dongle.com/help/ a) Click "Main" if you need manual of Hydra MAIN Tool b) Click "Qualcomm" if you need manual of Hydra Qualcomm Tool c) Click "MTK" if you need manual of Hydra MTK Tool d) Click "SPREADTRUM" if you need manual of SPREADTRUM Tool e) Click "Test Point" if you need help regarding TEST POINT 4. Untick "Auto Backup" and try to re-flash again 5. Try to load manual loader, after unticking "Auto Loader" 6. Tick "Format before Format" 7. You can tick or untick "Enable Write Preloader" 8. If you see error "Change to HIGH SPEED..." ,then, Untick "Enable High Speed" from "Configuration" tab at bottom down of Hydra Tool. 9. If you see error "Device is not sahara", then, Check the link: https://forum.gsmhosting.com/vbb/14370290-post19.html 10. If you see error "Device is not in Firehouse Mode", then, check: https://forum.gsmhosting.com/vbb/14370286-post18.html 11. If you see error "STATUS_SEC_IMG_TYPE_MISMATCH", then, check the link : https://forum.gsmhosting.com/vbb/14371599-post20.html 12. If you see error "PurgeComm function fail (Error 5)", then, check the link: https://forum.gsmhosting.com/vbb/14376119-post21.html 13. If you see the error "Please filter the device.....and run exploid again", then, visit: https://forum.gsmhosting.com/vbb/14330300-post15.html 14. Some device need to read system info before you do any operation, so, do it first "Read System info" 15. Some device does not go in different mode, then, do it manually as below : a) Meta Mode / Broom Mode : https://forum.gsmhosting.com/vbb/14322405-post12.html b) Fastboot Mode: https://forum.gsmhosting.com/vbb/14323205-post14.html c) Preloader mode: https://forum.gsmhosting.com/vbb/14323168-post13.html d) download mode (Samsung etc): Vol Down + Power e) Reset mode (Samsung etc) Vol up + Power Good Luck! BR Dipendra Pathak