Quote:
Originally Posted by Fast Unlocking Code: Redmi 9 using "bypass security
Flash files count is :25
Action : Firmware update.
Selected Model: 0-By CPU: ELBRUS
Exe version: NCKDongle AndroidMTK 2.7.5
Scenario: [0]Safe Flash
Phone must be off with battery inside.
Battery must be charged
Please connect phone in brom mode
For some phones need to keep "VOL-" button until inserting USB cable.
For some phones need to keep "VOL+ and VOL-" button until inserting USB cable.
For some phones need to keep "VOL+" button until inserting USB cable.
Detected(21) : MediaTek USB Port (COM21)
[21] \\?\usb#vid_0e8d&pid_0003#6&3b2f04e1&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
CPU: MT6768 CPU code: 707 Target config: e7
Secure boot enabled: true
Need serial link authorization: true
Need download agent authorization true
Executing exploit, do not disconnect phone
Exploit has been executed successfully.
Dumping phone preloader.
Waiting for handle to become active......
Received active handle reply from phone......
Booting phone
Detected(21) : MediaTek USB Port (COM21)
[21] \\?\usb#vid_0e8d&pid_0003#6&3b2f04e1&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Boot mode: Brom
Phone detected...Please wait
BBCHIP: 6768 0 ca00
Using Algo 1.
Helio MT6768 phone detected, swithing to helio api
Loading emmi from download
Helio enabled DRAM in First Da: FALSE
Sending loader.....
BBCHIP MT6768
[1]Storage EMMC
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 15010044503644 : 000000000000000000
EMMC UA SIZE: 0xe8f800000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe91000000 [58.266 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat operation.
Detected(20) : MediaTek DA USB VCOM (Android) (COM20)
[20] \\?\usb#vid_0e8d&pid_2001#6&3b2f04e1&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting flash Helio.
[2] WRITE TO PARTITION [ recovery ]
[7] WRITE TO PARTITION [ vbmeta ]
[8] WRITE TO PARTITION [ vbmeta_system ]
[9] WRITE TO PARTITION [ vbmeta_vendor ]
[21] WRITE TO PARTITION [ efuse ]
[24] WRITE TO PARTITION [ logo ]
[25] WRITE TO PARTITION [ md1img ]
[26] WRITE TO PARTITION [ spmfw ]
[27] WRITE TO PARTITION [ scp1 ]
[28] WRITE TO PARTITION [ scp2 ]
[29] WRITE TO PARTITION [ sspm_1 ]
[30] WRITE TO PARTITION [ sspm_2 ]
[33] WRITE TO PARTITION [ lk ]
[34] WRITE TO PARTITION [ lk2 ]
[35] WRITE TO PARTITION [ boot ]
[36] WRITE TO PARTITION [ dtbo ]
[37] WRITE TO PARTITION [ tee1 ]
[38] WRITE TO PARTITION [ tee2 ]
[45] WRITE TO PARTITION [ super ]
[46] WRITE TO PARTITION [ cache ]
[47] WRITE TO PARTITION [ userdata ]
HINT:
If phone stuck on logo, for some phones help factory reset.
Select factory reset tab/reset to factory default.
[Helio]Wait until phone will start charging.
[0]All done. |
late Update... But thanks For add it
Sent from my Mi 9T using Tapatalk