Quote:
Originally Posted by Gsm Unkown  Using library Brom_DLL_v7.1813.3
Engine version 1.0.0.5188
Searching phone in normal mode;
[connect the phone powered off to the usb cable]
Phone detected (MediaTek USB Port_V1632 (COM17)) (Driver version: 3.0.1504.0)
Preparing to start flash mode;
Preparing to open COM17
Requesting authorization;
Connecting;
Downloading DA;
Initializing;
Rid: 261b95f92611a0deba5a2a012dbc2b2c
Requesting baudrate change;
Done;
USB SPEED: USB_FULL_SPEED
Switching to DA_HIGHSPEED_VCOM;
Drivers location \usb_driver\Driver_Auto_Installer\SmartPhoneDriver \;
If the detection fails, install manually the port from the device manager using usbvcom.inf;
DA_HIGHSPEED_VCOM (@oem44.inf,%vcom_da%;MediaTek DA USB VCOM (Android))
TRYING TO OPEN COM69;
DEVICE INFO:
BB CHIP: MT6737M [CA00, 00, 335, 05]
HW_STORAGE_EMMC: 0x44000145 0x31303446 0xCAB30136 0xC7C393E8 [SIZE=0x3AC000000]
IMEI1 [OTP 0000]: 356801-08-003225-4
IMEI2 [OTP 0000]: 000000-00-000000-0
PROVIDER: 9026X-2EALAV1
USRDATA INFO: 0xEB000000 SIZE: 0x2BC880000
Loading the file ...
Cfg done ...
Formatting file system now...
Done;
Formatting PROTECT1 partition now...
Done;
Formatting PROTECT2 partition now...
Done;
Formatting SECCFG partition now...
Done;
Formatting FRP partition now...
Done;
Formatting NVDATA partition now...
Done;
Formatting METADATA partition now...
Done;
Downloading bootloader...
Done;
Downloading images...
Done;
Success;
Time needed - 00:06:21
Log file saved to: LOG_11_07_2021_06_08_00.txt
after flash still same bule display |
Then the display is bad. I will upload you later the same provider id but im sure the fault is within the display
Br
Sent from my iPhone using Tapatalk Pro