View Single Post
Old 07-21-2021, 16:50   #199 (permalink)
AbDuLlAH kHaWaR
Banned
 
Join Date: Nov 2010
Location: :::LONDON:::
Posts: 1,608
Member: 1442994
Status: Offline
Thanks Meter: 899
HuAWEI P30 PRO VOG-L29 FRP GMAIL REMOVE WITH TP FREE
Quote:
Welcome to Octoplus Huawei Software v.‪1.2.5.3‬

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:
1: COM4 HUAWEI Mobile Connect - Fake Acm Interface
2: COM5 Android Adapter PCUI
3: COM7 DBAdapter Reserved Interface

Job ID: 00000000014B555E
2021-07-21 15:36:29 GMT -------------------------------------------------
Starting ON/OFF Factory Mode
Selected phone model: ‪VOG-L29‬
To Enable Factory mode put the phone in Upgrade mode and connect USB cable!
To Disable Factory mode connect the phone in Factory mode or Factory Fastboot mode!
Checking the existence of the auto firmware file...
Performing ON Factory Mode operation...
Initializing remote service connection...
Downloading additional resources...
Checking firmware package type
Searching device in Upgrade mode...
Detected ‪DBAdapter Reserved Interface‬ port
Connecting to phone..
Error: Device does not support this update file
Warning: Switching your device to Factory Mode is not possible! Please, connect your device via Test Point and perform the desired operation.

ON/OFF Factory Mode failed.
Performed by ‪1.2.5.3‬ Software version.

Job ID: 00000000014B558E
2021-07-21 15:37:11 GMT -------------------------------------------------
Starting ON/OFF Factory Mode
Selected phone model: ‪VOG-L29‬
To Enable Factory mode put the phone in Upgrade mode and connect USB cable!
To Disable Factory mode connect the phone in Factory mode or Factory Fastboot mode!
Checking the existence of the auto firmware file...
Performing ON Factory Mode operation...
Initializing remote service connection...
Checking firmware package type
Searching device in Upgrade mode...
Detected ‪DBAdapter Reserved Interface‬ port
Connecting to phone..
Warning: Switching your device to Factory Mode is not possible! Please, connect your device via Test Point and perform the desired operation.

ON/OFF Factory Mode failed.
Performed by ‪1.2.5.3‬ Software version.

Job ID: 00000000014B578C
2021-07-21 15:47:21 GMT -------------------------------------------------
Starting Reset FRP (Factory Mode)
Selected phone model: ‪VOG-L29‬
Username:
Warning: Invalid username

Reset FRP (Factory Mode) failed.
Performed by ‪1.2.5.3‬ Software version.
Your balance: 30 credit(s)

Job ID: 00000000014B579E
2021-07-21 15:47:48 GMT -------------------------------------------------
Starting Reset FRP (Factory Mode)
Selected phone model: ‪VOG-L29‬
Username: octoplus888
Connecting to the credit server...
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Writing bootloader KIRIN980_V1...
Initializing remote service connection...
Downloading additional resources...
Writing ‪XLOADER‬ partition...
Writing ‪UCE‬ partition...
Writing ‪FASTBOOT‬ partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found android device: 026AYU19AH002170

Device Model: ‪VOG-L09‬
System: ‪VOG-L09 11.0.0.147(C431E8R2P3)‬
Checking balance...
Your balance: 30 credits
Sending device information...
Sending firmware information...
To perform this operation you need to have: 0 credits.
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ‪UNLOCKED‬
User Lock State: ‪LOCKED‬

Device Model: ‪VOG-L09‬
System: ‪VOG-L09 11.0.0.147(C431E8R2P3)‬
Resetting FRP...
Writing FRP partition..
Rebooting device...

Reset FRP (Factory Mode) done.
Performed by ‪1.2.5.3‬ Software version.
  Reply With Quote
The Following User Says Thank You to AbDuLlAH kHaWaR For This Useful Post:
 
Page generated in 0.10117 seconds with 7 queries