View Single Post
Old 08-05-2021, 04:20   #3 (permalink)
mtb116
No Life Poster
 
mtb116's Avatar
 
Join Date: Sep 2005
Location: Australia
Posts: 1,018
Member: 177568
Status: Offline
Thanks Meter: 146
I have unlocked quite a few of them but this gives me error. I have tried pressing volume up the whole way through. Security patch jan/2021

Using library Brom_DLL_v7.1813.3
Engine version 1.0.0.5294
Searching phone in emergency mode;
[connect the phone in "Firmware Update" Mode. Hold the Volume Up on the powered off phone and enter the USB cable in order to enter it]
Phone detected (USB\VID_1004&PID_6000&REV_0100)
Preparing to start flash mode;
Preparing to open COM11
Opened;
Authorising;
Authorized;
LAF_ERROR_ACCESS_DENIED
download_cable = 910K
battery_level = 55
download_type =
download_speed = 0
usb_version = UHS
hardware_revision = rev_11
download_sw_version =
device_sw_version = K420YM10s
secure_device = S
laf_sw_version = 1.1
device_factory_version = LMK420YMAT-01-V10b-505-03-JAN-19-2021+0
device_factory_out_version = LMK420YMAT-00-V10b-505-03-JAN-19-2021+0
pid = 13MFD026YDWP015M3
imei = 3565901xxxxxxxx
model_name = LM-K420YM
device_build_type = U
chipset_platform = mt6765
target_operator = LAO
target_country = COM
ap_factory_reset_status = 5
cp_factory_reset_status = 0
isDownloadNotFinish = 0
qem = 0
cupss_swfv = A1611074313-M1611074313-FFFFFFFFFFF-U1611078520-0
is_one_binary_dual_plan = 0
memory_size = 122159104
memory_id = G1J9P8

bootloader_ver = MiniOS 3.0
islan_download = 0
skip_readwrite = 0
Starting;
Setting secure mode;
Done;

Waiting for device; Be sure it restarted in "Firmware Update" Mode. If not, put it manually.
ERROR: Scan port failed ! - Repeat the operation keeping pressed volume up during the whole procedure !!!
Setting secure mode;
Done;

Time needed - 00:00:38

Log file saved to: LOG_5_08_2021_13_11_52.txt
  Reply With Quote
 
Page generated in 0.08790 seconds with 7 queries