Welcome to Octoplus Huawei Software v.1.2.5.3
To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode
To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode
To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'
Found COM ports:
Job ID: 0000000001627ED7
2021-08-11 13:25:14 GMT -------------------------------------------------
Starting Connect
Selected phone model: MAR-LX1A
Searching HUAWEI USB COM 1.0 port...
Error: HUAWEI USB COM 1.0 port not found
Searching Fastboot devices...
Canceling... Please be patient!
Connect canceled.
Performed by 1.2.5.3 Software version.
Job ID: 0000000001627F1D
2021-08-11 13:26:04 GMT -------------------------------------------------
Starting Connect
Selected phone model: MAR-LX1A
Searching Fastboot devices...
Canceling... Please be patient!
Connect canceled.
Performed by 1.2.5.3 Software version.
Job ID: 0000000001627F66
2021-08-11 13:26:51 GMT -------------------------------------------------
Starting Connect
Selected phone model: MAR-LX1A
Searching HUAWEI USB COM 1.0 port...
Detected HUAWEI USB COM 1.0 port
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Downloading additional resources...
Writing XLOADER partition...
Writing UCE partition...
Writing FASTBOOT partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found android device: JRQ0219726000734
Detected Android Sooner Single ADB Interface port
Device Model: MAR-LX1A
System: MAR-L01A 10.0.0.435(IRLC555E9R1P3)
FB Lock State: LOCKED
User Lock State: LOCKED
Connect done.
Performed by 1.2.5.3 Software version.
2021-08-11 13:28:38 GMT -------------------------------------------------
Starting Direct Unlock
Selected phone model: MAR-LX1A
Username:
Warning: Invalid username
Direct Unlock failed.
Performed by 1.2.5.3 Software version.
2021-08-11 13:28:53 GMT -------------------------------------------------
Starting Direct Unlock
Selected phone model: MAR-LX1A
Username: octoplus888
Connecting to the credit server...
Checking balance...
Your balance: 30 credits
Sending device information...
Sending firmware information...
To perform this operation you need to have: 0 credits.
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: UNLOCKED
User Lock State: LOCKED
Device Model: MAR-LX1A
System: MAR-L01A 10.0.0.435(IRLC555E9R1P3)
Saving backup of MODEM_SECURE...
Reading secure data...
Unlocking phone...
Rebooting device...
Direct Unlock done.
Performed by 1.2.5.3 Software version. |