| i am trying to clean rpmb for a107f. i successfully backup rom2 and rom 3 but rom 1 is very slow and with errors someone pliz help.
8/16/2021 2:06:58 PM> Looking for EasyJTAG box...
8/16/2021 2:06:58 PM> EasyJTAG API ver. 3403
8/16/2021 2:06:58 PM> Setting IO Levels to 2.8V
8/16/2021 2:06:58 PM> Setting frequence to 6 MHz
8/16/2021 2:06:58 PM> EasyJTAG Box Serial = 3D358578033FFFDB
8/16/2021 2:06:58 PM> EasyJTAG Box Firmware = 2.5302
8/16/2021 2:07:00 PM> Setting interface to EasyJtag2/ISP
8/16/2021 2:07:00 PM> Setting bus width to 1 Bit
8/16/2021 2:07:00 PM> Setting frequence to 6 MHz
8/16/2021 2:07:00 PM> CMD Pullup Level: 2092 mV
8/16/2021 2:07:00 PM> CMD Active Level: 2427 mV
8/16/2021 2:07:00 PM> eMMC Init returned = 0
8/16/2021 2:07:00 PM> EMMC Device Information :
8/16/2021 2:07:00 PM> EMMC CID: 150100514436334D42039F5568623755
8/16/2021 2:07:00 PM> EMMC CSD: D02701320F5903FFF6DBFFEF8E40400D
8/16/2021 2:07:00 PM> EMMC Manufacture : SAMSUNG , EMMC NAME: QD63MB , HEX: 514436334D42 , S/N: 9F556862 , rev. 0x03
8/16/2021 2:07:00 PM> EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 3/2020
8/16/2021 2:07:00 PM> EMMC ROM 1 (Main User Data) Capacity: 29820 MB (000747C00000)
8/16/2021 2:07:00 PM> EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
8/16/2021 2:07:00 PM> EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 KB (000001000000) Counter: 105602 , Response: Not Clean
8/16/2021 2:07:00 PM> EMMC Permanent Write Protection: No
8/16/2021 2:07:00 PM> EMMC Temporary Write Protection: No
8/16/2021 2:07:00 PM> Extended CSD Information :
8/16/2021 2:07:00 PM> Extended CSD rev: 1.8 (MMC 5.1)
8/16/2021 2:07:00 PM> Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
8/16/2021 2:07:00 PM> Boot Bus Config: 0x02 , width 8bit
8/16/2021 2:07:00 PM> H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
8/16/2021 2:07:00 PM> Supported partition features [PARTITIONING_SUPPORT]: 0x07
8/16/2021 2:07:01 PM> Device supports partitioning features
8/16/2021 2:07:01 PM> Device can have enhanced technological features in partitions and user data area
8/16/2021 2:07:01 PM> Device can have extended partitions attribute
8/16/2021 2:07:01 PM> Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
8/16/2021 2:07:01 PM> Backup saved: QD63MB_9F556862_20210816_140701.extcsd
8/16/2021 2:07:01 PM> EMMC Init completed.
8/16/2021 2:07:01 PM>
8/16/2021 2:07:01 PM> Operation: Reading from eMMC...
8/16/2021 2:07:01 PM>
8/16/2021 2:07:05 PM> Reading from: ROM1 , start: 0x000000000000 , size: 0x000747C00000
8/16/2021 2:07:05 PM> Output file: G:\a107f backup\EMMC_QD63MB_ROM1_000000000000_000747C00000. bin
8/16/2021 2:07:05 PM> eMMC switching to ROM1
8/16/2021 2:07:06 PM> Reading partition...
8/16/2021 2:07:30 PM> Error reading at address: 000000930000 , error: -4, DATA RCV CRC Error ... Retry #1
8/16/2021 2:07:30 PM> Error result: -4
8/16/2021 2:08:34 PM> Error reading at address: 000002C70000 , error: -3, DATA RCV Timeout Error ... Retry #1
8/16/2021 2:08:34 PM> Error result: -3
8/16/2021 2:09:48 PM> Error reading at address: 000004FB0000 , error: -3, DATA RCV Timeout Error ... Retry #1
8/16/2021 2:09:48 PM> Error result: -3
8/16/2021 2:10:41 PM> Error reading at address: 000006BD0000 , error: -4, DATA RCV CRC Error ... Retry #1
8/16/2021 2:10:41 PM> Error result: -4
8/16/2021 2:11:55 PM> Error reading at address: 000008F40000 , error: -3, DATA RCV Timeout Error ... Retry #1
8/16/2021 2:11:55 PM> Error result: -3
8/16/2021 2:12:58 PM> Error reading at address: 00000AB60000 , error: -3, DATA RCV Timeout Error ... Retry #1
8/16/2021 2:12:59 PM> Error result: -3
8/16/2021 2:14:02 PM> Error reading at address: 00000C750000 , error: -3, DATA RCV Timeout Error ... Retry #1
8/16/2021 2:14:02 PM> Error result: -3
8/16/2021 2:14:44 PM> Error reading at address: 00000E400000 , error: -1, CMD Timeout Error ... Retry #1
8/16/2021 2:14:44 PM> Error result: -1 |