[Fragga]

Loading firmware. Please wait... Done.
Selected eMMC interface.
Socket detected!

Selected PIN - CONNECTOR.

Please disconnect battery and USB cable.

Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : 50 MHz

Pin connector is detected!(eMMC: 1b, UFS: PWM 1-4)

Connecting...
Device : Samsung eMMC QN1SMB
Page size : 512 B
Block size : 512 B
Block count : 15269888
Size : 7.28 GB (7456.00 MB)
---------------------------------------------------------------
CID Info

CID : 150100514E31534D420104C1D618B2B3
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : QN1SMB
Full name one from : KMQN1000SM-B316
Product revision : 0.1
Product serial number : (hex) 4C1D618
Manufacturing date : 11/2015
---------------------------------------------------------------
CSD Info

CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info

Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 512 Kbytes

Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)

Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)

RST_n function : (0x00) RST_n signal is temporary disabled (default)

Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 3817472 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b

Backup EXT_CSD saved to file C:/Program Files/Medusa Pro Software/EXT_CSD Backups/QN1SMB_16_09_2021_09_38_19.bin.
Connect successful.
---------------------------------------------------------------
SW: 2.2.2; FW: 2.00.
P00: GPT (00000000, 00000800) 1024 KB
P01: modem (00000800, 00020000) 64 MB
P02: sbl1 (00020800, 00000800) 1024 KB
P03: sbl1bak (00021000, 00000800) 1024 KB
P04: rpm (00021800, 00000400) 512 KB
P05: rpmbak (00021C00, 00000400) 512 KB
P06: tz (00022000, 00000400) 512 KB
P07: tzbak (00022400, 00000400) 512 KB
P08: hyp (00022800, 00000400) 512 KB
P09: hypbak (00022C00, 00000400) 512 KB
P10: aboot (00023000, 00001000) 2048 KB
P11: abootbak (00024000, 00001000) 2048 KB
P12: boot (00025000, 00008000) 16 MB
P13: recovery (0002D000, 00008000) 16 MB
P14: fota (00035000, 00008000) 16 MB
P15: fotabk (0003D000, 00008000) 16 MB
P16: devparam (00045000, 00004000) 8 MB
P17: splash (00049000, 00003000) 6 MB
P18: system (0004C000, 00248000) 1168 MB
P19: cache (00294000, 00155800) 683 MB
P20: userdata (003E9800, 00A58800) 5.173 GB
P21: carrier (00E42000, 00014000) 40 MB
P22: reserve1 (00E56000, 00004000) 8 MB
P23: misc (00E5A000, 00000800) 1024 KB
P24: fsc (00E5A800, 00000400) 512 KB
P25: ssd (00E5AC00, 00000400) 512 KB
P26: DDR (00E5B000, 00000400) 512 KB
P27: fsg (00E5B400, 00001000) 2048 KB
P28: log (00E5C400, 0000A000) 20 MB
P29: logwork (00E66400, 0000A000) 20 MB
P30: bootwork (00E70400, 00002000) 4 MB
P31: chkcode (00E72400, 00000800) 1024 KB
P32: fotamng (00E72C00, 00000800) 1024 KB
P33: sec (00E73400, 00000400) 512 KB
P34: dnand (00E73800, 00004000) 8 MB
P35: sysprop (00E77800, 00004000) 8 MB
P36: persist (00E7B800, 00008000) 16 MB
P37: modemst1 (00E83800, 00001000) 2048 KB
P38: modemst2 (00E84800, 00001000) 2048 KB
P39: bfss1 (00E85800, 00002000) 4 MB
P40: bfss2 (00E87800, 00004000) 8 MB
P41: reserve2 (00E8B800, 00004000) 8 MB
Backuping fsg partition...
Opening C:/Program Files/Medusa Pro Software/Backups/QN1SMB_fsg_0xe5b400_0x1000_16_09_2021_09_38_19.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 2.2.2; FW: 2.00.
Backuping modemst1 partition...
Opening C:/Program Files/Medusa Pro Software/Backups/QN1SMB_modemst1_0xe83800_0x1000_16_09_2021_09_38_1 9.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 2.2.2; FW: 2.00.
Backuping modemst2 partition...
Opening C:/Program Files/Medusa Pro Software/Backups/QN1SMB_modemst2_0xe84800_0x1000_16_09_2021_09_38_1 9.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 2.2.2; FW: 2.00.
RPMB: Counter of the successful data write requests = 19.
Save to C:/Program Files/Medusa Pro Software/Samsung eMMC QN1SMB_16_09_2021__09_39_12.mpt file...
Reading partition GPT... Done.
Reading partition sbl1... Done.
Reading partition sbl1bak... Done.
Reading partition rpm... Done.
Reading partition rpmbak... Done.
Reading partition tz... Done.
Reading partition tzbak... Done.
Reading partition hyp... Done.
Reading partition hypbak... Done.
Reading partition aboot... Done.
Reading partition abootbak... Done.
Reading partition boot... Done.
Reading partition recovery... Done.
Reading partition fota... Done.
Reading partition fotabk... Done.
Reading partition devparam... Done.
Reading partition splash... Done.
Reading partition carrier... Done.
Reading partition reserve1... Done.
Reading partition misc... Done.
Reading partition fsc... Done.
Reading partition ssd... Done.
Reading partition DDR... Done.
Reading partition fsg... Done.
Reading partition log... Done.
Reading partition logwork... Done.
Reading partition bootwork... Done.
Reading partition chkcode... Done.
Reading partition fotamng... Done.
Reading partition sec... Done.
Reading partition dnand... Done.
Reading partition sysprop... Done.
Reading partition persist... Done.
Reading partition modemst1... Done.
Reading partition modemst2... Done.
Reading partition bfss1... Done.
Reading partition bfss2... Done.
Reading partition reserve2... Done.
Reading is finished.
SW: 2.2.2; FW: 2.00.
Reset operation finished





RESET OPPO FUNCTION