| QSmart_4G_plus Dead
hang on logo
Format FS / Reset Settings but still on logo then flashing set dead
Operation : Identify [ v2.14 ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9820E_BASE : SC9820e_eMMC_512MB_RS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0002
FDL : Control transfered!
Boot Done!
Device info :
UserData : STATE : PLAIN [EXTFS]
- > INFO : Remove cable from device to switch it off!
Done!
Elapsed: 00:00:55
Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9820E_BASE : SC9820e_eMMC_512MB_RS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0002
FDL : Control transfered!
Boot Done!
Wipe Ok : UserData
Wipe Ok : Cache
Wipe Ok : FRP
Reconnect Power/Cable!
Done!
Open : SPD_PROG.xml
Reading package ...
Read package finished!
Created by Infinity-Box (c) 2020
Chinese Miracle II : Spreadtrum / UniSoc Service Module
Device Info file : _Android_info.txt
Patch Level : KTU84P
Display ID : KTU84P test-keys
Ver. Incmt : QSmart_4G_plus_MP_07_11
Ver. CodeName : REL
Ver. Release : 4.4.4
Build Time : 1573112967
Product Model : 4G plus
Product Brand : SPRD
Product Name : 4G plus
Product Device : sp9820e_2h10
Product Board : sp9820e_2h10
Product Manfct : SPRD
Board Platform : sp9820e
Product Info : sp9820e_2h10
SECSolution : MODERN [RS/0S/1S/2S]
Operation : Flash Firmware [ v2.14 ]
Setting : Update NVRAM : False
Setting : Force NVRAM : False
Setting : Update PMT : True
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : INFINITY FW PACKAGE
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0002
FDL : Control transfered!
Boot Done!
PMTMng : Skip update! Reason : FWRead has been not complete by user!
Prepare target ...
Prepare Ok!
FSIMG : system.img
FSIMG : userdata.img
FSIMG : cache.img
CODE : boot.img
CODE : recovery.img
CODE : modem_l.bin
CODE : ldsp_l.bin
CODE : gdsp_l.bin
CODE : pm_sys.bin
CODE : modem_wcn.img
CODE : gnssmodem.bin
CODE : gnssbdmodem.bin
FSIMG : prodnv.img
FSIMG : udisk.img
CODE : boot_logo.bmp
CODE : fastboot_logo.bmp
FSIMG : persist.img
UBOOT : u-boot.bin
UBOOT : u-boot.bin
CODE : sml.bin
CODE : sml.bin
CODE : tos.bin
CODE : tos.bin
CODE : deltanv_l.bin
UBOOT : u-boot-spl.bin
ERASE : MISC
ERASE : FLASH_L
ERASE : UBOOT_LOG
Flashing finished!
Reconnect Power/Cable!
Done!
Elapsed: 00:01:54 |