GSM-Forum - View Single Post - OPPO's (Realme) FRP/Code/Pattern reset thread. Post operations, pinout here

Akhtar Ali Jatt · 11-05-2021, 10:58

Checking security ...
Z3X EasyJtag Software ver. 3.7.0.24
Loading eMMC GEN2 Firmware... IO: 2600 mV
Box S/N: 99A6985582C3A1F2, ,FW Ver.: 02.53
CMD Pullup Level:2075 mV
CMD Active Level:2225 mV
Box IO Level:2600 mV
CLK Rate:1000 kHz
Bus Width:1bit,SDR
HiPower mode is off!
---------- eMMC Device Information ----------

eMMC CID : 150100514536334D4203D284CE2CB5C9
eMMC CSD : D02701320F5903FFF6DBFFEF8E40400D
eMMC Manufacturer ID: 0015 , OEM ID: 0100
eMMC Date: 11/2018 Rev.0x3
eMMC NAME: QE63MB , S/N: 3531918892
eMMC NAME (HEX): 514536334D42
Possible eMMC NAME Mismatch
Possible IC Name[0]: Samsung , KMQE60013M-B318/16GB @BGA221 FFU5 , Firmware is Updatable
Possible IC Name[1]: Samsung , KMQE60013M-B318/16GB @BGA221 Rev1 , Firmware is Updatable
EMMC ROM1 (Main User Data) Capacity: 14910 MB , 0x1D1F000 pages , 0x3A3E00000 bytes
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB
EMMC RPMB is programmed and written 72664 times
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG: 0x38] Boot from:ROM1 (Main User Area)
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x38.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity WP group size [HC_WP_GRP_SIZE: 0x00004000]
Partitioning Support [PARTITIONING_SUPPORT]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Writing Recovery Command to MISC
Done.

11-05-2021, 10:58	#259 (permalink)
Akhtar Ali Jatt No Life Poster Join Date: Jan 2009 Location: Sindh Pakistan Posts: 8,871 Member: 953334 Status: Offline Sonork: 100.1614005 Thanks Meter: 15,420	Oppo A3S oppo Reset DOne Checking security ... Z3X EasyJtag Software ver. 3.7.0.24 Loading eMMC GEN2 Firmware... IO: 2600 mV Box S/N: 99A6985582C3A1F2, ,FW Ver.: 02.53 CMD Pullup Level:2075 mV CMD Active Level:2225 mV Box IO Level:2600 mV CLK Rate:1000 kHz Bus Width:1bit,SDR HiPower mode is off! ---------- eMMC Device Information ---------- eMMC CID : 150100514536334D4203D284CE2CB5C9 eMMC CSD : D02701320F5903FFF6DBFFEF8E40400D eMMC Manufacturer ID: 0015 , OEM ID: 0100 eMMC Date: 11/2018 Rev.0x3 eMMC NAME: QE63MB , S/N: 3531918892 eMMC NAME (HEX): 514536334D42 Possible eMMC NAME Mismatch Possible IC Name[0]: Samsung , KMQE60013M-B318/16GB @BGA221 FFU5 , Firmware is Updatable Possible IC Name[1]: Samsung , KMQE60013M-B318/16GB @BGA221 Rev1 , Firmware is Updatable EMMC ROM1 (Main User Data) Capacity: 14910 MB , 0x1D1F000 pages , 0x3A3E00000 bytes EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 kB EMMC RPMB is programmed and written 72664 times EMMC Permanent Write Protection: No EMMC Temporary Write Protection: No EMMC Password Locked: No Extended CSD rev 1.8 (MMC 5.1) Boot configuration [PARTITION_CONFIG: 0x38] Boot from:ROM1 (Main User Area) Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x38. H/W reset function [RST_N_FUNCTION]: 0x01 High-capacity WP group size [HC_WP_GRP_SIZE: 0x00004000] Partitioning Support [PARTITIONING_SUPPORT]: 0x07 Device support partitioning feature Device can have enhanced tech. Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00 --------------------------------------------- Writing Recovery Command to MISC Done.