Software test point not working for 980 kirin based devices, use a blank loader instead kirin 980 loader, here's log of operation, P30 also tested and failed, can you guys fix this issue ? other kirin based device loads their loader correctly, for example, kirin 980 devices using Software TP try's loading a ENABLE_TESTPOINT_0.dtwork, instead other kirin based as kirin 710, loads Kirin710_P1_V2.dtwork correctly
Code:
Ultimate NCK Huawei Flasher 0.0.0.163
user:913000649
Doing job: Enable software testpoint
Looking for devices...
Looking for devices by ports
No device deteced
Number of devices found: 1
Number of devices found: 1
Device authorized
Base Version:LYA-LGRP2-OVS 11.0.0.172
Cust Version:LYA-L09-CUST 11.0.0.4(C432)
Preload Version:LYA-L09-PRELOAD 11.0.0.4(C432R1)
Name:LYA-L09
Model:LYA-L09
Board:LYA
IMEI:86916
IMEI1:86916
MEID:A00000
SN:F3R7N19
USB Device REMOVAL
Type: @oem34.inf,%busfilter.devicedesc%;USB Composite Device
VidPid: VID_12D1&PID_107E
Instance id: F3R7N19314003177
Looking for device in upgrade mode...
USB Device INSERTION
Type: @oem34.inf,%busfilter.devicedesc%;USB Composite Device
VidPid: VID_12D1&PID_107E
Instance id: F3R7N19314003177
COM10: Android Adapter PCUI (COM10)
COM9: DBAdapter Reserved Interface (COM9)
Devices detected in UPDATE mode
13/12/2021 03:33:11 p. m. Starting to write device in UPGRADE mode...
Device found: F3R7N19314003177
13/12/2021 03:33:13 p. m. start to update enable testpoint
File to update: ENABLE_TESTPOINT.dtwork
Process identifier:37601107
Validating file...
Looking for attached port...
Preparing to write...
Bypass version checked
Checking partition ...
Extracting partition SHA256RSA...
Procesing .. ..
Error downloading file ENABLE_TESTPOINT_0.dtwork, partition: SHA256RSA
Error writing software
13/12/2021 03:33:33 p. m. Writing device finished with ERROR
Process FAIL.
Please, try with device in Update mode and selecting a compatible firmware file