| Qmobile i8i flash done
Open : SPD_PROG.xml
Reading package ...
Read package finished!
Created by Infinity-Box (c) 2020
Chinese Miracle II : Spreadtrum / UniSoc Service Module
Device Info file : _Android_info.txt
Patch Level : OPM2.171019.012
Display ID : OPM2.171019.012 release-keys
Ver. Incmt : 1574120907
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2019-12-05
Build Time : 21.12.2019
Product Model : i7i 2020
Product Info : i7i_2020
Product Brand : QSmart
Product Name : i7i_2020
Product Device : i7i_2020
Product Model : i7i2020
Product Manfct : QMobile
Product Board : i7i-2020
Board Platform : sp7731e
SECSolution : MODERN [RS/0S/1S/2S]
Operation : Flash Firmware [ v2.14 ]
Setting : Update NVRAM : False
Setting : Force NVRAM : False
Setting : Update PMT : True
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : INFINITY FW PACKAGE
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0002
FDL : Control transfered!
Boot Done!
PMTMng : Load PMT
PMTMng : 0x20
PMTMng : Update PMT Ok!
Prepare target ...
Prepare Ok!
FSIMG : prodnv.img
CODE : recovery.img
CODE : tos.bin
CODE : tos.bin
CODE : sml.bin
CODE : sml.bin
UBOOT : u-boot.bin
UBOOT : u-boot.bin
CODE : boot_logo.bmp
CODE : fastboot_logo.bmp
FSIMG : persist.img
CODE : gnssmodem.bin
CODE : gnssbdmodem.bin
CODE : modem_wcn.img
CODE : modem_w.bin
CODE : deltanv_w.bin
CODE : gdsp_w.bin
CODE : pm_sys.bin
CODE : boot.img
FSIMG : system.img
FSIMG : cache.img
FSIMG : vendor.img
CODE : vbmeta.img
CODE : vbmeta.img
FSIMG : userdata.img
UBOOT : u-boot-spl.bin
ERASE : MISC
ERASE : UBOOT_LOG
ERASE : FLASH_W
Flashing finished!
Reconnect Power/Cable!
Done!
Elapsed: 00:03:35 |