Tecno Spark 7 Pro Showing Network Unlock Done but Still Lock
Exe version: GSMSHIELD MTK 2.3
Selected model: 0-By CPU ELBRUS
Phone must be off with battery inside.
Battery must be charged
Please insert USB cable now...
For some phones need to keep "VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+" button untill inserting USB cable.
Detected(6) : MediaTek PreLoader USB VCOM (Android) (COM6)
[6] \\?\usb#vid_0e8d&pid_2000#5&27c6eb94&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[29]META Port Detected: MediaTek USB VCOM (Android) (COM29)
USB\VID_0E8D&PID_2007\5&27C6EB94&0&1
Start sync target, waiting responce.....
ChipID: MT6768
[MT6768]Using Algo 5
Start sync target, waiting responce.....
[META]BaseBand CPU : MT6768
[META]SW_VER : MOLY.LR12A.R3.MP.V146.4.P11
[META]HW_VER : TK_MD_BASIC_HW
Meta mode conected ok, start reading phone....
[helio]Read simlock info.
IMEI Location: NVRAM
Phone imei[1] : 35
Phone imei[2] : 35
Getting simlock handle, please wait...
[104]Simlock Info : Sim [1]
Block1[N] :UnLocked [remain: 0]
Block2[NS] :Unlocked
Block3[SP] :Unlocked
Block4[C] :Unlocked
Block5[SIM]:Unlocked
**************************************
[104]Simlock Info : Sim [2]
Block1[N] :UnLocked [remain: 0]
Block2[NS] :Unlocked
Block3[SP] :Unlocked
Block4[C] :Unlocked
Block5[SIM]:Unlocked
**************************************
Error start AP mode.
[0]All done.
Exe version: GSMSHIELD MTK 2.3
Selected model: 0-By CPU ELBRUS
Action: Unlock
Detected(6) : MediaTek PreLoader USB VCOM (Android) (COM6)
USB\VID_0E8D&PID_2000\5&27C6EB94&0&1
Phone must be off with battery inside.
Battery must be charged
Please insert USB cable now...
For some phones need to keep "VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+ and VOL-" button untill inserting USB cable.
For some phones need to keep "VOL+" button untill inserting USB cable.
Detected(6) : MediaTek PreLoader USB VCOM (Android) (COM6)
[6] \\?\usb#vid_0e8d&pid_2000#5&27c6eb94&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Starting META mode, wait...
Restarting to meta,wait....
If drivers missing, please install CDC drivers.
This can take up to 5 min on slow phones.
If take too long, check device manager for drivers.
[29]META Port Detected: MediaTek USB VCOM (Android) (COM29)
USB\VID_0E8D&PID_2007\5&27C6EB94&0&1
Start sync target, waiting responce.....
ChipID: MT6768
[MT6768]Using Algo 5
Start sync target, waiting responce.....
[META]BaseBand CPU : MT6768
[META]SW_VER : MOLY.LR12A.R3.MP.V146.4.P11
[META]HW_VER : TK_MD_BASIC_HW
[helio]Read simlock info.
IMEI Location: NVRAM
Phone imei[1] : 356
Phone imei[2] : 356
Start direct unlock[SIM1]
Simlock checksum is ok.
Direct unlock done
Start direct unlock[SIM2]
Simlock checksum is ok.
Direct unlock done
[0]All done.