| Vivo Y20i [V2027] Screen Lock Remove Done But FRP Lock Still Remining ;(
Model : Y20 (PD2034F)
Operation : Erase Userdata
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM4)
Driver Info : Network Connect, qcusbser.sys, 3.0.0.0
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1601300 [SDM460] 03007300
OPK_DATA : F754F13EE91BF54295CA1FBD64D182067440B35FC41B798A53 9670EA259771BA
Initializing Protocol...OK
Preparing Loader...Done
Sending Loader [PD2034F]...Done
Executing Loader...OK
Initiazling Storage...OK
Read : Protected
Write : Protected
Alt. Write : Blocked
Erasing Userdata...Done
Erasing FRP Data... ..Done
Operation Finished.
QcFire Ver. 7.3
Device : Vivo Y20 (PD2034F)
Operation : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM4)
Driver Info : Network Connect, qcusbser.sys, 3.0.0.0
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1601300 [SDM460] 03007300
OPK_DATA : F754F13EE91BF54295CA1FBD64D182067440B35FC41B798A53 9670EA259771BA
Initializing Protocol...OK
Using Auto Loader Selection [4]
No compatible loader found. Device may not boot with this loader.
Preparing Loader...Done
Sending Loader [SDM460]...Write Error!
Please use correct loader and check USB port / cable.
Operation Finished.
QcFire Ver. 7.3 |