GSM-Forum - View Single Post

Akhtar Ali Jatt · 01-28-2022, 14:18

Open VPLfile : TA-1114_059Z0X8_10.00.11.vpl
Description : TA-1114 IC
DeviceType : TA-1114
ProductCode : 059Z0X8
SoftwareVer : 10.00.11
PPM LangPack :
[1] : Arabic (Saudi Arabia)
[2] : Portuguese (Portugal)
[3] : French (France)
[4] : English (United Kingdom)
Load Ok!

Operation : Write FirmWare [ v1.20 ]
Setting : UserData erase : True
Setting : LangPack Only : False

1. Make sure device is powered off. Power off, if need. Wait 10 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : Nokia USB Serial Port (COM14)
MODE : NOKIA USB SERIAL
PORT : 14
BROM : Init BROM
BROM init passed!
CHIP : MT6261 , SBID : 0xCB01 , HWVR : 0x8000 , SWVR : 0x0001
BROM : SECCFG : 0x00000005
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : 502191B57EF6488A97044D6FB34B15BE
BROM : Run BootLoader ...
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ...
BOOT : RTC : 000E
BOOT : PRJ : NEMO61D.10.00.11.p2
BOOT : SWR : 10.00.11
AGENT : Look for suitable BootChain in DA ...
AGENT : DEFAULT AUTO
AGENT : Found MT6261
AGENT : NEMO61D.10.00.11.p2
BOOT : Sending 1st DA ...
BOOT : DA sent
BOOT : Transfer control to DA ...
DA : Sync Passed!
DA : Authentification pass!
DA : Agent : v03.02 on BBID : 0x8E

NOR: 00C8 : 0060 : 0016 : 0000
NOR: [GigaDevice] GD25LQ32
NOR:
TSIZE : 0x00400000 [ 4.00 MB ]
PSIZE : 0x00400000 [ 4.00 MB ]
STYPE : 0x00000000
FLOTP : DA_NOR_OTP_EXIST

STATUS : OK
BSTYLE : SF_FLASH_BOOT

Boot done!

VPL SoftwareVersion : 10.00.11 [TA-1114]
DEV SoftwareVersion : 10.00.11
SWInfo compare result : SAME

Load FlashSet :
MROM : TA-1114_ROM_eMP_10.00.11
LANG : TA-1114_LANG_PACK_ROM_IC_eMP_10.00.11_001
CUST : TA-1114_CUSTPACK_ROM_IC_eMP_10.00.11_001
JUMP : TA-1114_JUMP_TABLE_IC_eMP_10.00.11_001
VIVA : TA-1114_VIVA_eMP_10.00.11

Prepare FlashSet :
DCR : TA-1114_ROM_eMP_10.00.11
DCR : TA-1114_LANG_PACK_ROM_IC_eMP_10.00.11_001
DCR : TA-1114_CUSTPACK_ROM_IC_eMP_10.00.11_001
DCR : TA-1114_JUMP_TABLE_IC_eMP_10.00.11_001
DCR : TA-1114_VIVA_eMP_10.00.11

Prepare Target
SDS : OK : 0x003F8000 : 0x00008000
FFS Format Ok!

Erase Target Flash
Erase done!

Write Target Flash
Write : TA-1114_ROM_eMP_10.00.11
Write : TA-1114_LANG_PACK_ROM_IC_eMP_10.00.11_001
Write : TA-1114_CUSTPACK_ROM_IC_eMP_10.00.11_001
Write : TA-1114_JUMP_TABLE_IC_eMP_10.00.11_001
Write : TA-1114_VIVA_eMP_10.00.11
Write done, waiting target response ...
Write flash done!

Verify Target FlashContent
Verify : TA-1114_ROM_eMP_10.00.11
Verify : TA-1114_LANG_PACK_ROM_IC_eMP_10.00.11_001
Verify : TA-1114_CUSTPACK_ROM_IC_eMP_10.00.11_001
Verify : TA-1114_JUMP_TABLE_IC_eMP_10.00.11_001
Verify : TA-1114_VIVA_eMP_10.00.11

Done!
Elapsed: 00:01:04

Reconnect Power/Cable!

01-28-2022, 14:18	#1295 (permalink)
Akhtar Ali Jatt No Life Poster Join Date: Jan 2009 Location: Sindh Pakistan Posts: 8,876 Member: 953334 Status: Online Sonork: 100.1614005 Thanks Meter: 15,424	Nokia 106 TA-1114 FullFlash Done Open VPLfile : TA-1114_059Z0X8_10.00.11.vpl Description : TA-1114 IC DeviceType : TA-1114 ProductCode : 059Z0X8 SoftwareVer : 10.00.11 PPM LangPack : [1] : Arabic (Saudi Arabia) [2] : Portuguese (Portugal) [3] : French (France) [4] : English (United Kingdom) Load Ok! Operation : Write FirmWare [ v1.20 ] Setting : UserData erase : True Setting : LangPack Only : False 1. Make sure device is powered off. Power off, if need. Wait 10 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : Nokia USB Serial Port (COM14) MODE : NOKIA USB SERIAL PORT : 14 BROM : Init BROM BROM init passed! CHIP : MT6261 , SBID : 0xCB01 , HWVR : 0x8000 , SWVR : 0x0001 BROM : SECCFG : 0x00000005 BROM : NOKIA USB SERIAL BROM : 0x05 BL : 0x00 BROM : MEID : 502191B57EF6488A97044D6FB34B15BE BROM : Run BootLoader ... BOOT : Run BL ver. 01 BOOT : 0x05 BL : 0x01 BOOT : WD : 0005 BOOT : RTC : Setup ... BOOT : RTC : 000E BOOT : PRJ : NEMO61D.10.00.11.p2 BOOT : SWR : 10.00.11 AGENT : Look for suitable BootChain in DA ... AGENT : DEFAULT AUTO AGENT : Found MT6261 AGENT : NEMO61D.10.00.11.p2 BOOT : Sending 1st DA ... BOOT : DA sent BOOT : Transfer control to DA ... DA : Sync Passed! DA : Authentification pass! DA : Agent : v03.02 on BBID : 0x8E NOR: 00C8 : 0060 : 0016 : 0000 NOR: [GigaDevice] GD25LQ32 NOR: TSIZE : 0x00400000 [ 4.00 MB ] PSIZE : 0x00400000 [ 4.00 MB ] STYPE : 0x00000000 FLOTP : DA_NOR_OTP_EXIST STATUS : OK BSTYLE : SF_FLASH_BOOT Boot done! VPL SoftwareVersion : 10.00.11 [TA-1114] DEV SoftwareVersion : 10.00.11 SWInfo compare result : SAME Load FlashSet : MROM : TA-1114_ROM_eMP_10.00.11 LANG : TA-1114_LANG_PACK_ROM_IC_eMP_10.00.11_001 CUST : TA-1114_CUSTPACK_ROM_IC_eMP_10.00.11_001 JUMP : TA-1114_JUMP_TABLE_IC_eMP_10.00.11_001 VIVA : TA-1114_VIVA_eMP_10.00.11 Prepare FlashSet : DCR : TA-1114_ROM_eMP_10.00.11 DCR : TA-1114_LANG_PACK_ROM_IC_eMP_10.00.11_001 DCR : TA-1114_CUSTPACK_ROM_IC_eMP_10.00.11_001 DCR : TA-1114_JUMP_TABLE_IC_eMP_10.00.11_001 DCR : TA-1114_VIVA_eMP_10.00.11 Prepare Target SDS : OK : 0x003F8000 : 0x00008000 FFS Format Ok! Erase Target Flash Erase done! Write Target Flash Write : TA-1114_ROM_eMP_10.00.11 Write : TA-1114_LANG_PACK_ROM_IC_eMP_10.00.11_001 Write : TA-1114_CUSTPACK_ROM_IC_eMP_10.00.11_001 Write : TA-1114_JUMP_TABLE_IC_eMP_10.00.11_001 Write : TA-1114_VIVA_eMP_10.00.11 Write done, waiting target response ... Write flash done! Verify Target FlashContent Verify : TA-1114_ROM_eMP_10.00.11 Verify : TA-1114_LANG_PACK_ROM_IC_eMP_10.00.11_001 Verify : TA-1114_CUSTPACK_ROM_IC_eMP_10.00.11_001 Verify : TA-1114_JUMP_TABLE_IC_eMP_10.00.11_001 Verify : TA-1114_VIVA_eMP_10.00.11 Done! Elapsed: 00:01:04 Reconnect Power/Cable!