[motin123]

Operation : Read FW [ v2.14 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_UT61x_BASE : UT61x_eMMC_4GB_0S
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!

Boot Done!

Device info :
Product Brand : Symphony
Product Device : Z33
Product Model : Z33
Product Name : Z33
Patch Level : RP1A.201005.001
Display ID : Z33_HW2_V13
Ver. Incmt : 145
Ver. CodeName : REL
Ver. Release : 11
Sec. Patch : 2021-12-05
Build Time : 27.12.2021
Product Info : Z33
Product Board : ums512_1h10
Board Platform : ums512
Product Manfct : Symphony

AndroidVer : 11
VlnrLevel : 0x00

UMS512__11__Z33_HW2_V13__RP1A.201005.001__Z33

Read : prodnv.img
ExtSparse : Compression ratio : 17%
Read : phase.cfg
Read : tos.bin
Read : sml.bin
Read : u-boot.bin
Read : boot_logo.bmp
Read : fastboot_logo.bmp
Read : nvitem_l.bin
Read : gnssmodem.bin
Read : modem_wcn.img
Make : persist.img
Read : modem_l.bin
Read : deltanv_l.bin
Read : gdsp_l.bin
Read : ldsp_l.bin
Read : agdsp_a_l.bin
Read : cdsp_l.bin
Read : pm_sys.bin
Read : teecfg.bin
Read : boot.img
Read : dtbo.img
Read : super.img
Make : cache.img
Read : socko.img
ExtSparse : Compression ratio : 67%
Read : odmko.img
ExtSparse : Compression ratio : 2%
Read : vbmeta.img
Read : vbmeta_system.img
Read : vbmeta_vendor.img
Read : vbmeta_system_ext.img
Read : vbmeta_product.img
Make : userdata.img
Read : u-boot-spl.bin

Firmware size : 0x106EE0890 ( 4.11 GiB )
Android Info saved : _Android_info.txt
Reconnect Power/Cable!