plz help ,i need the solution for this problem...
Z3X EasyJtag Software ver. 3.7.0.23
UFS Socket Info.
Serial: 01231409D4ECB269EE
Description: EasyJTAG UFS Socket BGA-254 by EasyJTAG 07.08.20
Identify UFS Chip.
UFS Chip Voltage: Low
VCC: 3250mV
VCCQ2: 1899mV
Chip Info:
Manufacturer: SAMSUNG
ProductName: KM8V8001JM-B813
SerialNumber: 3cd4c51c540d
OemID: SAMSUNG_OEM_ID
Firmware Version: 1.0.0.0
UFS Version: 2.1
Maximum Number of LUs: 8
Number of LUs found: 6
LUN 0:
Block size: 0x1000
Size: 0x1D3D000000 / 116,976,000,000B / 116GB
LUN 1 (Boot A):
Block size: 0x1000
Size: 0x800000 / 0,008,000,000B / 8MB
LUN 2 (Boot B):
Block size: 0x1000
Size: 0x800000 / 0,008,000,000B / 8MB
LUN 3:
Block size: 0x1000
Size: 0x2000000 / 0,032,000,000B / 32MB
LUN 4:
Block size: 0x1000
Size: 0x6E800000 / 1,744,000,000B / 1GB
LUN 5:
Block size: 0x1000
Size: 0x1C000000 / 0,448,000,000B / 448MB
Number of W-LUs found: 1
W-LUN 0xC4 (RPMB):
Block size: 0x100
Size: 0x1000000 / 0,016,000,000B / 16MB
Full size: 0x1DCC800000 / 119,200,000,000B / 119GB
RPMB:
Counter: 57599
Health:
Device life time method A: 0x01 (0%-10% device life time used)
Device life time method B: 0x01 (0%-10% device life time used)
Pre End of Life: 0x01 (Used less then 80% of reserved blocks)
Write UFS Firmware.
Input file :C:\Program Files\Z3X\EASYJTAG\UFS Firmware\SAMSUNG-KM8V8001JM-B813.bin
Update Firmware
Can't write firmware to chip, Code: -108, Reason: UTP: response timeout
Done.
easyjtag.jpg