Selected model: Nokia TA-1334 (Nokia G10)
Operation: Format Flash
Software version: 3.6
This procedure will erase all flash and can damage your device.
Make sure that you have a backup created. Continue? YES
Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Connect phone to BOX in BROM mode
Wait for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0766
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Get sec config... OK [000000E7]
Active sec flags: [SBC SLA DAA]
Advanced Bypass Security... OK
Disconnect virtual port... OK
Connect Type-C to HUB... OK
Wait for device connecting... OK
Driver: [Sony Mobile Communications,usbser,MTK USB Port,usbser.sys,10.0.19041.1202]
Device found at COM6 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x31A4F200, 0xDDB29553, 0x6F01E1A3, 0xBB18562C
Get Chip ID... [MT6765]
Get SOC ID... [4532EFCA67FB4C3BFDBE04C98E2BEA78DF1850CBC250C5A28B ED86E1B0F7EA35]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [7]
Send preloader... OK
Start preloader... OK
Check preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x880103534C44363447605D0399B37849
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_ID : 0x880103534C44363447605D0399B37849
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x0E67800000 (57.62Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
Check USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Check A/B state... OK [A]
Read product info... OK
Product Brand : Nokia
Product Manufacturer : HMD Global
Product Model : Nokia G10
Product Name : Rogue_00WW
Product Device : ROGA_sprout
Product Board : MT6762
Board Platform : MT6765
Build ID : RP1A.200720.011
Build Date : Thu Mar 10 02:36:45 CST 2022
Display ID : 00WW_1_260_SP05
Security Patch : 2022-03-05
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : 00WW_1_26E
Read partition "preloader"... error(8), skip
Read partition "pgpt"... error(STATUS_UNSUPPORT_CMD), skip
Read partition "nvcfg"... error(8), skip
Read partition "nvdata"... error(STATUS_UNSUPPORT_CMD), skip
Read partition "protect1"... error(8), skip
Read partition "protect2"... error(STATUS_UNSUPPORT_CMD), skip
Read partition "persist"... error(8), skip
Read partition "proinfo"... error(STATUS_UNSUPPORT_CMD), skip
Read partition "efuse"... OK
Read partition "nvram"... error(8), skip
Read partition "oem"... error(STATUS_UNSUPPORT_CMD), skip
Read partition "elabel"... error(8), skip
Read partition "otp"... error(STATUS_UNSUPPORT_CMD), skip
Read partition "flashinfo"... error(8), skip
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Nokia_TA-1334%20(Nokia%20G10)/FORMAT_BACKUP_(2022-6-22_15-50-52)/"directory
Create autoformat settings... OK
Format EMMC_BOOT_1 partition( 0x00000000..0x003FFFFF )... error(2)
