FRP G-TiDE V7s Operation : Identify [ v2.14 ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731x_BASE : SC7731C_eMMC_1GB_NS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!
Boot Done!
Device info :
Patch Level : MRA58K
Display ID : MRA58K release-keys
Ver. Incmt : eng.root.20170828.173944
Ver. CodeName : REL
Ver. Release : 6.0
Sec. Patch : 2016-05-01
Build Time : 28.08.2017
Product Model : G-TiDE V7s
Product Brand : G-TiDE
Product Name : c177_gal_241
Product Device : c177_gal_241
Product Board : c177_gal_241
Product Manfct : G-TiDE
Board Platform : sc8830
Product Info : c177_gal_241
NVMng : SecurityInfo
IMEI[1] : 352533081027900
IMEI[2] : 352533081027918
IMEI[3] : 358570010103893
WIFIMAC : 0027151081D6
BT_MAC : 155815111889
SEC : SLS:0, SKS:0, SKV:0
Platform Version: MOCORTM_14B_7731C_W16.22.2_Debug
Project Version: sc7731C_CP0_modem
BASE Version: TM_BASE_W16.22.2
MMI Version: sc7731C_modem
HW Version: sc7731C_CP0_modem
CMP_Time : 05-23-2016 10:23:50
MODEM TAG : MOCORTM_14B_7731C_W16.22.2_Debug_TM_BASE_W16.22.2_ sc7731C_CP0_modem_sc7731C_CP0_modem_sc7731C_modem
UserData : STATE : PLAIN [EXTFS]
- > INFO : Remove cable from device to switch it off!
Done!
Elapsed: 00:00:31
Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731x_BASE : SC7731C_eMMC_1GB_NS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!
Boot Done!
Wipe Ok : UserData
Wipe Ok : Cache
Wipe Ok : FRP
Reconnect Power/Cable!
Done!
Elapsed: 00:00:23 |