View Single Post
Old 10-27-2022, 19:23   #1 (permalink)
fazargsm
No Life Poster
 
Join Date: Nov 2009
Location: sri lankan
Posts: 959
Member: 1167260
Status: Offline
Sonork: 100.1604772
Thanks Meter: 165
JNY-lx2 huawei id Question [Answered]

its say unlock done but still ask huawei id......

Quote:
Welcome to Octoplus Huawei Software v.‪1.3.3‬

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:
1: COM1 Communications Port
2: COM39 HUAWEI USB COM 1.0
3: COM5 USB Serial Port

Job ID: 0000000001AD1825
2022-10-27 18:17:41
Starting Reset Huawei ID
Selected phone model: ‪JNY-LX2‬
Selected method: Reset Huawei Id (EMUI12/Harmony)
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Phone connect successfully
Writing bootloader KIRIN810_V3...
Initializing remote service connection...
Writing ‪XLOADER‬ partition...
Writing ‪UCE‬ partition...
Writing ‪FASTBOOT‬ partition...
Operation in progress. Please wait for instructions...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found android device: UT7ULK20AW006994
Detected ‪Android Sooner Single ADB Interface‬ port
Reading basic data...
Device Model: ‪JNY-LX2‬
System: ‪JNY-L22 12.0.0.242(C636E4R5P4)‬
Android Version: ‪10‬
Base Version: ‪JNY-LGRP2-OVS 102.0.0.242‬
Custom Version: ‪JNY-L22-CUST 102.0.0.4(C636)‬
Preload Version: ‪JNY-L22-PRELOAD 102.0.0.4(C636R5)‬
C_Version: ‪C636‬
D_Version: ‪D000‬
FB Lock State: ‪LOCKED‬
User Lock State: ‪LOCKED‬
Downloading resource...
Connecting to the credit server...
Username: Default_user
Checking balance...
Your balance: 0 credits
Sending device information...
Sending firmware information...
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ‪UNLOCKED‬
User Lock State: ‪LOCKED‬
Device Model: ‪JNY-LX2‬
System: ‪JNY-L22 12.0.0.242(C636E4R5P4)‬
MEID: ‪A00000BE01E25D‬
IMEI A: ‪864400048441023‬
IMEI B: ‪864400048451030‬
Writing secure data...
Resetting Huawei ID...
Reset Huawei ID done.
Performed by ‪1.3.3‬ Software version.
  Reply With Quote
 
Page generated in 0.09981 seconds with 7 queries