View Single Post
Old 11-18-2022, 14:09   #333 (permalink)
AbDuLlAH kHaWaR
Banned
 
Join Date: Nov 2010
Location: :::LONDON:::
Posts: 1,608
Member: 1442994
Status: Offline
Thanks Meter: 899
Welcome to Octoplus Huawei Software v.‪1.3.3‬

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:
1: COM10 HUAWEI USB COM 1.0

Job ID: 0000000001B5D2A4
2022-11-18 13:07:33
Starting Direct Unlock
Selected phone model: ‪MAR-LX1A‬
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Phone connect successfully
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Downloading resource...
Writing ‪XLOADER‬ partition...
Writing ‪UCE‬ partition...
Writing ‪FASTBOOT‬ partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found android device: JRQ0219C23001025
Detected ‪Android Sooner Single ADB Interface‬ port
Reading basic data...
Device Model: ‪MAR-LX1A‬
System: ‪MAR-L01A 12.0.0.239(IRLC555E3R1P1)‬
Android Version: ‪10‬
Base Version: ‪MAR-LGRP2-OVS 102.0.0.239‬
Custom Version: ‪MAR-L01A-CUST 102.0.0.3(IRLC555)‬
Preload Version: ‪MAR-L01A-PRELOAD 102.0.0.1(IRLC555R1)‬
C_Version: ‪IRLC555‬
D_Version: ‪D000‬
FB Lock State: ‪LOCKED‬
User Lock State: ‪LOCKED‬
Downloading resource...
Connecting to the credit server...
Username: Default_user
Checking balance...
Your balance: 0 credits
Sending device information...
Sending firmware information...
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ‪UNLOCKED‬
User Lock State: ‪LOCKED‬
Device Model: ‪MAR-LX1A‬
System: ‪MAR-L01A 12.0.0.239(IRLC555E3R1P1)‬
Saving backup of MODEM_SECURE...
Reading secure data...
Unlocking phone...
Rebooting device...
Direct Unlock done.
Performed by ‪1.3.3‬ Software version.
  Reply With Quote
The Following User Says Thank You to AbDuLlAH kHaWaR For This Useful Post:
 
Page generated in 0.08226 seconds with 7 queries