Huawei Mate Pro FRP LYA-L09 done
Quote:
Welcome to Octoplus Huawei Software v.1.3.3
To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode
To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode
To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'
Found COM ports:
1: COM105 HUAWEI USB COM 1.0
2: COM69 RIM Virtual Serial Port v2
3: COM70 RIM Virtual Serial Port v2
Job ID: 000000000191992F
2022-11-29 10:53:56
Starting Read Info
Selected phone model: LYA-L09
Selected method: Read Info (EMUI 11)
Searching HUAWEI USB COM 1.0 port...
Detected HUAWEI USB COM 1.0 port
Phone connect successfully
Writing bootloader KIRIN980_V3...
Initializing remote service connection...
Writing XLOADER partition...
Writing UCE partition...
Writing FASTBOOT partition...
Operation in progress. Please wait for instructions...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found android device: 7N5GSJ18BC152616
Detected Android Sooner Single ADB Interface port
Reading basic data...
Device Model: LYA-L09
System: LYA-L09 9.0.0.126(C316E11R1P16)
Android Version: 9
Base Version: LYA-LGRP2-OVS 9.0.0.126
Custom Version: LYA-L09-CUST 9.0.0.11(C316)
Preload Version: LYA-L09-PRELOAD 9.0.0.16(C316R1)
C_Version: C316
D_Version: D000
FB Lock State: LOCKED
User Lock State: LOCKED
Read Info done.
Performed by 1.3.3 Software version.
Job ID: 0000000001B9D273
2022-11-29 10:55:50
Starting Reset FRP
Selected phone model: LYA-L09
Selected method: Reset Frp (EMUI 10)
Searching HUAWEI USB COM 1.0 port...
Error: HUAWEI USB COM 1.0 port not found
Searching Fastboot devices...
Canceling... Please be patient!
Reset FRP canceled.
Performed by 1.3.3 Software version.
Job ID: 0000000001BEA827
2022-11-29 10:57:20
Starting Reset FRP
Selected phone model: LYA-L09
Selected method: Reset Frp (EMUI 10)
Searching HUAWEI USB COM 1.0 port...
Detected HUAWEI USB COM 1.0 port
Phone connect successfully
Writing bootloader KIRIN980_V5...
Initializing remote service connection...
Writing XLOADER partition...
Writing UCE partition...
Writing FASTBOOT partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found android device: 7N5GSJ18BC152616
Detected Android Sooner Single ADB Interface port
Reading basic data...
Device Model: LYA-L09
System: LYA-L09 9.0.0.126(C316E11R1P16)
Android Version: 9
Base Version: LYA-LGRP2-OVS 9.0.0.126
Custom Version: LYA-L09-CUST 9.0.0.11(C316)
Preload Version: LYA-L09-PRELOAD 9.0.0.16(C316R1)
C_Version: C316
D_Version: D000
FB Lock State: LOCKED
User Lock State: LOCKED
Connecting to the credit server...
Username: Default_user
Warning: The phone contains an unknown firmware version. Make sure you follow the correct method for this operation.
Checking balance...
Your balance: 0 credits
Sending device information...
Sending firmware information...
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: UNLOCKED
User Lock State: LOCKED
Device Model: LYA-L09
System: LYA-L09 9.0.0.126(C316E11R1P16)
MEID: A000009C183F96
IMEI A: 869161031463953
IMEI B: 869161031463953
Resetting FRP...
Writing FRP partition..
Rebooting device...
Reset FRP done.
Performed by 1.3.3 Software version.
|