View Single Post
Old 01-26-2023, 01:32   #1 (permalink)
EpicFix
Junior Member
 
Join Date: Oct 2019
Location: USA
Posts: 3
Member: 2932427
Status: Offline
Thanks Meter: 0
FRP did not work [Answered]

Hi..I have Huawei P30 Lite (MAR-LX3A) and it is supported by FRP Dongle. I connect in FastBoot Mode and click "Reset FRP". Nothing happens. The log is below.


SW version: MAR-L23A 10.0.0.470(C605E5R4P3)
Performed by 2.2.4.0 Software version.

Work ID: 0000000001CDF4D2
Platform: HUAWEI
Selected model: MAR-LX3A
Performed by 2.2.4.0 Software version.

Work ID: 0000000001A3019A
Platform: HUAWEI
Selected model: MAR-LX3A
Performed by 2.2.4.0 Software version.

Platform: HUAWEI
Selected model: MAR-LX3A
Put the phone in FastBoot Mode:
1. Remove SD and SIM cards from the phone
2. Power phone OFF
3. Press and hold "Vol-" and insert USB cable
4. Wait until the phone enter in FastBoot Mode
Searching for a phone. Please wait...
Detected phone model: MAR-LX3A
SW version: MAR-L23A 10.0.0.470(C605E5R4P3)
Performed by 2.2.4.0 Software version.

Work ID: 0000000001CDF4D5
Platform: HUAWEI
Selected model: MAR-LX3A
Performed by 2.2.4.0 Software version.

Platform: HUAWEI
Selected model: MAR-LX3A
Selected port: COM1
Put the phone in FastBoot Mode:
1. Remove SD and SIM cards from the phone
2. Power phone OFF
3. Press and hold "Vol-" and insert USB cable
4. Wait until the phone enter in FastBoot Mode
Searching for a phone. Please wait...
Detected phone model: MAR-LX3A
SW version: MAR-L23A 10.0.0.470(C605E5R4P3)
Performed by 2.2.4.0 Software version.

Work ID: 0000000001A3019F
Platform: HUAWEI
Selected model: MAR-LX3A
Selected port: COM1
Performed by 2.2.4.0 Software version.
  Reply With Quote
 
Page generated in 0.06975 seconds with 7 queries