| hUAWEI MATE 20 PRO FRP done.
Device Model: LYA-L29
Current software version: LYA-L29 12.0.0.142(C636E2R2P1)
Hardware version: Ver3.0
Boot info: locked
Image check: secure image verify fail
Android version: 10
Battery state: 3732mv
Key version: huawei_key_v1
Root info: SAFE
Rescue version: rescue0.8
Phone info: NO MAIN VERSION
VendorCountry: hw/spcseas
Base version: LYA-LGRP2-OVS 102.0.0.142
Cust version: LYA-L29-CUST 102.0.0.2(C636)
Preload version: LYA-L29-PRELOAD 102.0.0.1(C636R2)
Finished at local time: [02.12.23 18:24:50]
WorkID: 212212856
Removing Huawei account
Rebooting phone to factory mode
We counld't identify the device, please select manually, if present!
We counld't identify the device, please select manually, if present!
We counld't identify the device, please select manually, if present!
We counld't identify the device, please select manually, if present!
We counld't identify the device, please select manually, if present!
We counld't identify the device, please select manually, if present!
We counld't identify the device, please select manually, if present!
We counld't identify the device, please select manually, if present!
We counld't identify the device, please select manually, if present!
We counld't identify the device, please select manually, if present!
Changing to factory mode
Rebooting phone to USB update mode
Please put the phone into factory mode via Test Point!
Or do an USB firmware update with a firmware version that is equal or not much older than the one currently on the phone.
If you used Test Point to switch into factory mode, you should immediately reconnect your phone's battery as soon as the program detects the device.
If you fail to reconnect the battery, your phone might be still locked after the procedure finished
We counld't identify the device, please select manually, if present!
Uploading data...
Servicing the phone
Please be patient, this step can be long. DO NOT DISCONNECT the phone while the procedure is running. It can damage your phone permanently.
The phone will automatically start factory reset, after that it might shut down. You need to turn on the phone afterwards.
IMPORTANT! Please do not connect your phone to the Internet (WiFi) and ensure there's no SIM-card present in the phone until you have completed the initial setup wizard!
Finished at local time: [02.12.23 18:19:02]
WorkID: 212212139 |