| a047f some chips read some dont those which dont read do this
Z3X EasyJtag Software ver. 3.8.0.1
Loading eMMC GEN2 Firmware... IO: 1800 mV
Box S/N: 93E8964E6FA82E9E, ,FW Ver.: 02.53
CMD Pullup Level:1851 mV
CMD Active Level:1850 mV
Box IO Level:1800 mV
CLK Rate:24000 kHz
Bus Width:1bit,SDR
HiPower mode is off!
---------- eMMC Device Information ----------
eMMC CID : 15010044563644424200CAC36AE189FF
eMMC CSD : D02701320F5903FFF6DBFFEF8E40400D
eMMC Manufacturer ID: 0015 , OEM ID: 0100
eMMC Date: 08/2006 Rev.0x0
eMMC NAME: DV6DBB , S/N: 3401804513
eMMC NAME (HEX): 445636444242
Can't init EMMC, Reason: DATA RCV Timeout Error
Check Data Line!
Done.
Can't init device, Reason: Initialization failed
Done.
Error. Please select init first.
Z3X EasyJtag Software ver. 3.8.0.1
Loading eMMC GEN2 Firmware... IO: 2200 mV
Box S/N: 93E8964E6FA82E9E, ,FW Ver.: 02.53
CMD Pullup Level:2012 mV
CMD Active Level:2115 mV
Box IO Level:2200 mV
CLK Rate:24000 kHz
Bus Width:1bit,SDR
HiPower mode is off!
---------- eMMC Device Information ----------
eMMC CID : 15010044563644424200CAC36AE189FF
eMMC CSD : D02701320F5903FFF6DBFFEF8E40400D
eMMC Manufacturer ID: 0015 , OEM ID: 0100
eMMC Date: 08/2006 Rev.0x0
eMMC NAME: DV6DBB , S/N: 3401804513
eMMC NAME (HEX): 445636444242
Can't init EMMC, Reason: DATA RCV Timeout Error
Check Data Line!
Done.
Can't init device, Reason: Initialization failed
Done. |