| ppa lx2 wirte cert other tool is working but hcu stuck
ppa lx2 wirte cert other tool is working but hcu stuck this file downloading file Kirin710_P1_V2_6.dtwork...
Before operation turn phone to TestPoint mode:
Turn off phone, then short TestPoint on phone pcb
and plug USB cable
Wait for device "HUAWEI USB COM 1.0" in Ports
Read phone info
2023-03-07 15:43:24.148 Selected Cpu/Bootloader - Kirin710_P1_V2
2023-03-07 15:43:24.151 Connecting to server...
2023-03-07 15:43:24.533 Connected!
2023-03-07 15:43:27.000 Find device COM44, handle 12564
BOOTLOADER selected to update:Kirin710_P1_V2
downloading file Kirin710_P1_V2_0.dtwork...
downloading file Kirin710_P1_V2_2.dtwork...
downloading file Kirin710_P1_V2_3.dtwork...
downloading file Kirin710_P1_V2_4.dtwork...
downloading file Kirin710_P1_V2_6.dtwork...
Process file Kirin710_P1_V2_6.dtwork Fail, repeat...
2023-03-07 15:43:58.453 Write to port error!
other tool is working but hcu stuck
Job ID: 00000000018E5E7F
2023-03-07 10:40:05
Starting Repair Info
Selected phone model: PPA-LX2
Searching HUAWEI USB COM 1.0 port...
Detected HUAWEI USB COM 1.0 port
Phone connect successfully
Writing bootloader KIRIN710A_V3...
Initializing remote service connection...
Writing XLOADER partition...
Writing UCE partition...
Writing FASTBOOT partition...
Operation in progress. Please wait for instructions...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found android device: CNXNU20C07207000
Detected Android Sooner Single ADB Interface port
Reading basic data...
Device Model: PPA-LX2
System: PPAH-L22 10.1.1.200(C432E4R4P1)
Android Version: 10
Base Version: PPAH-LGRP2-OVS 10.1.1.200
Custom Version: PPAH-L22-CUST 10.1.1.4(C432)
Preload Version: PPAH-L22-PRELOAD 10.1.1.1(C432R4)
C_Version: C432
D_Version: D000
FB Lock State: LOCKED
User Lock State: LOCKED
Downloading resource...
Repairing info...
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: UNLOCKED
User Lock State: LOCKED
Removing firmware downgrade and cutomization limitations...
Rebooting device...
Repair Info done.
Performed by 1.3.3 Software version. |