GSM-Forum - View Single Post

sharckis · 09-08-2023, 00:41

Please help me Pandora has an error without a solution, I already uninstalled it and tried it on another PC and it continues the same error I tried with other computers and the same thing happens from the serial repair function to reading partitions

Selected model: Realme RMX2001 (Realme 6/6s)
Operation: Read PTT
Software version: 5.7

Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Connect phone to [BOX] in BROM mode
Waiting for device... canceled

Selected model: Realme RMX2001 (Realme 6/6s)
Operation: Read PTT
Software version: 5.7

Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in BROM Mode
Waiting for device... OK
Driver: [MediaTek Inc.,usbser,MediaTek USB Port,usbser.sys,10.0.22621.1778]
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0813
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6785]
Install LibUSB... OK
Waiting for device... OK
Open port... OK
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,usbser,MediaTek USB Port,usbser.sys,10.0.22621.1778]
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0813
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6785]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xA997D933, 0x40F35F78, 0x04860200, 0x642DAD3C
Get Chip ID... [MT6785]
Get SOC ID... [1E2D343CC6109366CE73C9FB6A37229891172F962F62F2568F DCB8C1055A8C2A]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [12]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
UFS CID (FW VER): MT128GASAO4U21 (0101)
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
UFS INFO:
UFS_CID : MT128GASAO4U21
UFS_FWVER : 0101
BLOCK_SIZE: 0x0000001000 (4,00Kb)
UFS_LU0 : 0x0000400000 (4,00Mb)
UFS_LU1 : 0x0000400000 (4,00Mb)
UFS_LU2 : 0x1DCB000000 (119,17Gb)
RAM INFO:
INT_SRAM: 0x0000080000 (512,00Kb)
EXT_RAM : 0x0100000000 (4,00Gb)
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... error(8)
Read partition "preloader"... error(1), skip
Read partition "pgpt"... error(1), skip
Read partition "recovery_a"... error(1), skip
Read partition "misc"... error(1), skip
Read partition "para"... error(1), skip
Read partition "opporeserve1"... error(1), skip
Read partition "opporeserve2"... error(1), skip
Read partition "opporeserve3"... error(1), skip
Read partition "oppo_custom"... error(1), skip
Read partition "expdb"... error(1), skip
Read partition "frp"... error(1), skip
Read partition "vbmeta"... error(1), skip
Read partition "vbmeta_system"... error(1), skip
Read partition "vbmeta_vendor"... error(1), skip
Read partition "nvcfg"... error(1), skip
Read partition "nvdata"... error(1), skip
Read partition "md_udc"... error(1), skip
Read partition "metadata"... error(1), skip
Read partition "persist"... error(1), skip
Read partition "protect1"... error(1), skip
Read partition "protect2"... error(1), skip
Read partition "seccfg"... error(1), skip
Read partition "otp"... error(1), skip
Read partition "sec1"... error(1), skip
Read partition "proinfo"... error(1), skip
Read partition "nvram"... error(1), skip
Read partition "md1img"... error(1), skip
Read partition "special_preload"... error(1), skip
Read partition "my_custom"... error(1), skip
Read partition "boot_para"... error(1), skip
Read partition "spmfw"... error(1), skip
Read partition "audio_dsp"... error(1), skip
Read partition "scp1"... error(1), skip
Read partition "scp2"... error(1), skip
Read partition "sspm_1"... error(1), skip
Read partition "sspm_2"... error(1), skip
Read partition "cam_vpu1"... error(1), skip
Read partition "cam_vpu2"... error(1), skip
Read partition "cam_vpu3"... error(1), skip
Read partition "cdt_engineering"... error(1), skip
Read partition "gz1"... error(1), skip
Read partition "gz2"... error(1), skip
Read partition "lk"... error(1), skip
Read partition "lk2"... error(1), skip
Read partition "boot"... error(1), skip
Read partition "logo"... error(1), skip
Read partition "dtbo"... error(1), skip
Read partition "recovery"... error(1), skip
Read partition "tee1"... error(1), skip
Read partition "tee2"... error(1), skip
Read partition "super"... error(1), skip
Read partition "cache"... error(1), skip
Read partition "flashinfo"... error(1), skip
Read partition "sgpt"... error(1), skip
Saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Realme_RMX2001%20(Realme%206&6s)/DUMP_PARTITIONS_(2023-9-7_18-19-4)/
Dumping Partitions done!

09-08-2023, 00:41	#1 (permalink)
sharckis Junior Member Join Date: Dec 2016 Location: Colombia Posts: 33 Member: 2664998 Status: Offline Thanks Meter: 3	pandora error 5.7 [Answered] Please help me Pandora has an error without a solution, I already uninstalled it and tried it on another PC and it continues the same error I tried with other computers and the same thing happens from the serial repair function to reading partitions Selected model: Realme RMX2001 (Realme 6/6s) Operation: Read PTT Software version: 5.7 Host Power Off... OK Switch virtual port to USB... OK Connect Type-C to BOX... OK Host Power On... OK Connect phone to [BOX] in BROM mode Waiting for device... canceled Selected model: Realme RMX2001 (Realme 6/6s) Operation: Read PTT Software version: 5.7 Connect Type-C to NONE... OK Host Power Off... OK Connect phone to [PC] in BROM Mode Waiting for device... OK Driver: [MediaTek Inc.,usbser,MediaTek USB Port,usbser.sys,10.0.22621.1778] Device found at COM3 [BROM] Open port... OK Send start cmd... OK Get HW code from device... 0813 Get sec config... OK [000000E5] Active sec flags: [SBC DAA] Get HW & SW version from device... OK HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00 Detect chip [MT6785] Install LibUSB... OK Waiting for device... OK Open port... OK Library Version [2] Select platform... OK Init BROM... OK Force Charge... OK Disable WatchDog Timer... OK Release testpoint, waiting 2 seconds Advanced Bypass Security... OK Waiting for device... OK Driver: [MediaTek Inc.,usbser,MediaTek USB Port,usbser.sys,10.0.22621.1778] Device found at COM3 [BROM] Open port... OK Send start cmd... OK Get HW code from device... 0813 Get sec config... OK [000000E0] Active sec flags: [] Get HW & SW version from device... OK HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00 Detect chip [MT6785] Library Version [2] Select platform... OK Init BROM... OK Force Charge... OK Disable WatchDog Timer... OK Reopen port for libver2... OK Get ME ID... OK ME_ID = 0xA997D933, 0x40F35F78, 0x04860200, 0x642DAD3C Get Chip ID... [MT6785] Get SOC ID... [1E2D343CC6109366CE73C9FB6A37229891172F962F62F2568F DCB8C1055A8C2A] Get sec config... OK [000000E0] Load DownloadAgent... OK Search DA... OK [12] Send preloader... OK Start preloader... OK Checking preloader answer... OK Send bootloader... OK Start bootloader... OK Wait for answer from bootloader... OK Send SYNC signal... OK Setup device enviroment... OK Setup device parametres... OK Receive DA SYNC signal... OK Set DA parametres... OK Get device connection agent... [BROM] Get device info... OK UFS CID (FW VER): MT128GASAO4U21 (0101) Load EMI from phone... OK Parse EMI config... OK Init EXT RAM... OK Send 2nd DA... OK Get device info... OK UFS INFO: UFS_CID : MT128GASAO4U21 UFS_FWVER : 0101 BLOCK_SIZE: 0x0000001000 (4,00Kb) UFS_LU0 : 0x0000400000 (4,00Mb) UFS_LU1 : 0x0000400000 (4,00Mb) UFS_LU2 : 0x1DCB000000 (119,17Gb) RAM INFO: INT_SRAM: 0x0000080000 (512,00Kb) EXT_RAM : 0x0100000000 (4,00Gb) Checking USB status... USB_HIGH_SPEED Read partitions info from phone... OK Checking A/B state... OK Read product info... error(8) Read partition "preloader"... error(1), skip Read partition "pgpt"... error(1), skip Read partition "recovery_a"... error(1), skip Read partition "misc"... error(1), skip Read partition "para"... error(1), skip Read partition "opporeserve1"... error(1), skip Read partition "opporeserve2"... error(1), skip Read partition "opporeserve3"... error(1), skip Read partition "oppo_custom"... error(1), skip Read partition "expdb"... error(1), skip Read partition "frp"... error(1), skip Read partition "vbmeta"... error(1), skip Read partition "vbmeta_system"... error(1), skip Read partition "vbmeta_vendor"... error(1), skip Read partition "nvcfg"... error(1), skip Read partition "nvdata"... error(1), skip Read partition "md_udc"... error(1), skip Read partition "metadata"... error(1), skip Read partition "persist"... error(1), skip Read partition "protect1"... error(1), skip Read partition "protect2"... error(1), skip Read partition "seccfg"... error(1), skip Read partition "otp"... error(1), skip Read partition "sec1"... error(1), skip Read partition "proinfo"... error(1), skip Read partition "nvram"... error(1), skip Read partition "md1img"... error(1), skip Read partition "special_preload"... error(1), skip Read partition "my_custom"... error(1), skip Read partition "boot_para"... error(1), skip Read partition "spmfw"... error(1), skip Read partition "audio_dsp"... error(1), skip Read partition "scp1"... error(1), skip Read partition "scp2"... error(1), skip Read partition "sspm_1"... error(1), skip Read partition "sspm_2"... error(1), skip Read partition "cam_vpu1"... error(1), skip Read partition "cam_vpu2"... error(1), skip Read partition "cam_vpu3"... error(1), skip Read partition "cdt_engineering"... error(1), skip Read partition "gz1"... error(1), skip Read partition "gz2"... error(1), skip Read partition "lk"... error(1), skip Read partition "lk2"... error(1), skip Read partition "boot"... error(1), skip Read partition "logo"... error(1), skip Read partition "dtbo"... error(1), skip Read partition "recovery"... error(1), skip Read partition "tee1"... error(1), skip Read partition "tee2"... error(1), skip Read partition "super"... error(1), skip Read partition "cache"... error(1), skip Read partition "flashinfo"... error(1), skip Read partition "sgpt"... error(1), skip Saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Realme_RMX2001%20(Realme%206&6s)/DUMP_PARTITIONS_(2023-9-7_18-19-4)/ Dumping Partitions done!