Code:
Patch Level: PPR1.180610.011
Display ID: KC2-H6113AI-P-200827V278
SW Version: AI-200827V278
Ver. CodeName: REL
Ver. Release: 9
Sec. Patch: 2020-09-05
Build Time: 27/08/2020 9:54:38 am
Product Model: TECNO KC2
Product Brand: TECNO
Product Name: H6113
Product Device: TECNO-KC2
CPU: arm64-v8a,armeabi-v7a,armeabi
CPU: armeabi-v7a,armeabi
CPU: arm64-v8a
Product Manfct: TECNO MOBILE LIMITED
Product Info: kc2_h6113
SW: full_kc2_h6113-user 9 PPR1.180610.011 35942 release-keys
Product Board: TECNO-KC2
Board Platform: mt6761
Strategy: [none|generic]
Firmware ID: MT6761_TECNO_MOBILE_LIMITED_TECNO_KC2_OSv9_KC2-H6113AI-P-200827V278_PPR1.180610.011_kc2_h6113
Verify firmware [MT6761_TECNO_MOBILE_LIMITED_TECNO_KC2_OSv9_KC2-H6113AI-P-200827V278_PPR1.180610.011_kc2_h6113]...
Firmware is unknown
Please upload https://infinity-box.com/?r=100020
Analyze userdata...
userData: fileSystem : [f2fs] with FDE [forced fde or fbe]
Analyze modem...
TK_MD_BASIC_MDBIN_PCB01_MT6761_S00.MOLY_LR12A_R3_MP_V66_11_P30
Analyze nvram...
Offset 0x3FFFE00 of 0x4000000; Error 0xC0010002 ABORT
Verify config values...
Ok
Loaders Ok
STORAGE Life Status: eMMC : OK
STORAGE OTP Status: UNLOCKED
STORAGE RPMB Status: eMMC : RPMB KEY NOT PROGRAMMED [USABLE]
Reset port...
Done: 00:01:00
Reconnect Power/Cable now
Operation: Reset Settings/Format FS [ v2.52 ]
Platform: MTK SmartPhone - MT65/67/68/69/81/83/87 | Helio G/P/X
[-] Wipe
[-] Userdata
[+] FRP
[-] Smart
WARNING: Reset may delete ALL USER DATA!
Reset Userdata is Off
If FRP still active after reset make Userdata On and repeat operation
Wait...
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device [remember Vol+ | Vol-]
Waiting for device connection...
PTFN: MediaTek PreLoader USB VCOM (Android) (COM12)
MODE [0]: PRELOADER PORT; PORT: 12
Waiting for BOOT ACK...
BROM: Init... Ok
CHIP: MT6761 SBID: 0x8A00 HWVR: 0xCA01 SWVR: 0x0200 EVOL: 0x0000 HWC: 0x0717
CODE: Merlot
TYPE: MODERN [RAPHAEL]
BROM: Sec Level: 0x00000005 Mode: SBC+SDA
VER: 0xFF BL: 0x03 [PRELOADER PORT]
SOCID: 26C1B4D4EEA953EC8AD620E3DAE205FD17A5200C78842BD2220CF42163B64462
IRG: 0x00000080
AGENT: AUTO: 0_base: base_v2316
[1d5fdec4] C:\InfinityBox\CM2MT2\boot\0_base\base_v2316\MTK_AllInOne_DA.1d5fdec4.bin
Looking for suitable BootChain in DA...
Found: MT6761; DA: MTK_DOWNLOAD_AGENT
BROM: Sending 1st DA...
Reset Interface
PTFN: MTK USB Port (COM28)
MODE [0]: BOOTROM; PORT: 28
Waiting for BOOT ACK...
BROM: Init... Ok
CHIP: MT6761 SBID: 0x8A00 HWVR: 0xCA01 SWVR: 0x0200 EVOL: 0x0000 HWC: 0x0717
CODE: Merlot
TYPE: MODERN [RAPHAEL]
MEID: 554F7669B6E7ADEB7098136A28E52419
BROM: Sec Level: 0x000000E5 Mode: SBC+SDA+EXT
VER: 0x05 BL: 0xFE [BOOTROM]
SOCID: 26C1B4D4EEA953EC8AD620E3DAE205FD17A5200C78842BD2220CF42163B64462
SLA: Local Auth [Forced mode]
Start Auth... Ok
Continue Auth... Ok
EMI known
SLA: Start 0x15
Auth Passed; SEC: 0x000000E0
EMI loaded by MEID: 554F7669B6E7ADEB7098136A28E52419
AGENT: AUTO: 0_base: base_v2316
[1d5fdec4] C:\InfinityBox\CM2MT2\boot\0_base\base_v2316\MTK_AllInOne_DA.1d5fdec4.bin
Looking for suitable BootChain in DA...
Found: MT6761; DA: MTK_DOWNLOAD_AGENT
BROM: Sending 1st DA...
DA sent
Jump to DA... Ok
Sync... Ok
DA: Agent Started
DA: SYNC
MODE: BROM
EXT_RAM NOT initialized
EMMC CID: 150100474436424D4201234DD3D396CF crc Ok
Ven: Samsung OEM: 256 ID: 474436424D42 [GD6BMB] PRV: 0x01
SNN: 592303059 [0x234DD3D3]
MM/YY: 9/2019
EMI: FireFly preloader_kc2_h6113.bin with 13 memory type(s)
1. eMMC DDR3 ID: 90014A68423861503E Hynix hB8aP> RAM: 3.00 Gb
2. eMMC DDR3 ID: FE014A333232344433 Micron 3224D3 RAM: 3.00 Gb
3. eMMC DDR3 ID: 90014A484347386134 Hynix HCG8a4 RAM: 4.00 Gb
4. eMMC DDR3 ID: 150100514536334D42 Samsung QE63MB RAM: 2.00 Gb
5. eMMC DDR3 ID: 150100464536324D42 Samsung FE62MB RAM: 1.00 Gb
6. eMMC DDR3 ID: 90014A484147346132 Hynix HAG4a2 RAM: 2.00 Gb
7. eMMC DDR3 ID: 150100514436334D42 Samsung QD63MB RAM: 2.00 Gb
8. eMMC DDR3 ID: 90014A68423861503E Hynix hB8aP> RAM: 2.00 Gb
9. eMMC DDR3 ID: 700100464D42434541 Kingston FMBCEA RAM: 2.00 Gb
10. eMMC DDR3 ID: 150100524836344142 Samsung RH64AB RAM: 4.00 Gb
11. eMMC DDR3 ID: 90014A684339615033 Hynix hC9aP3 RAM: 4.00 Gb
12. eMMC DDR3 ID: 150100474436424D42 Samsung GD6BMB RAM: 3.00 Gb
13. eMMC DDR3 ID: 90014A484147346132 Hynix HAG4a2 RAM: 3.00 Gb
Push EMI... EXT_RAM CFG Passed
DA: Boot to 2nd DA...
2nd stage confirmed
DA: SYNC Ok
Load HW info...
RAM: SRAM: 0x0003A600 [ 233.50 Kb ]
RAM: DRAM: 0xC0000000 [ 3.00 Gb ]
EMMC CID: 150100474436424D4201234DD3D396CF crc Ok
Ven: Samsung OEM: 256 ID: 474436424D42 [GD6BMB] PRV: 0x01
SNN: 592303059 [0x234DD3D3]
MM/YY: 9/2019
BOOT1: 0x00400000 [ 4.00 Mb ]
BOOT2: 0x00400000 [ 4.00 Mb ]
RPMB: 0x00400000 [ 4.00 Mb ]
USER: 0x747C00000 [ 29.12 Gb ]
CHIP: MT6761 SBID: 0x8A00 HWVR: 0xCA01 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0717
CODE: Merlot
TYPE: MODERN [RAPHAEL]
RNID: 913467ADD8DC9DCCBBA5DEA7097A668F
MEID: 554F7669B6E7ADEB7098136A28E52419
USB: HIGH-SPEED
Boot done MODERN [RAPHAEL]
Analyze PMT... Ok
PMT: PGPT [0x64] Records: 39
Strategy: [none|generic]
Verify config values...
Ok
Loaders Ok
Stage: Android OS Off
Stage: FRP...
[1] PROTECTION...
Done
Reset port...
Trying to reboot...
Done: 00:00:29
Reconnect Power/Cable now