[ahsanglare]

Selected model: Tecno BC2 (Tecno Pop 4)
Operation: Erase FRP And Wipe
Software version: 8.0
Erasing of partitions can damage your device.
Make sure that you have a backup created. Continue? YES


Connect phone in BROM Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1511.0]
You are using driver version 3.0.1511.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM62 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 6580
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6580]
LibUSB installed
Library Version [1]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1511.0]
You are using driver version 3.0.1511.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM62 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 6580
Get sec config... OK [00000000]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6580]
Library Version [1]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Load DownloadAgent... OK
ME_ID = 0xEADA8E2C, 0x4DE7D71B, 0x51419CD9, 0xD789586D
Get BROM version... OK
Search DA... OK [26]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Checking bootloader answer... OK
Wait for answer from bootloader... OK
Wait for hw detection... OK
Wait DA version... v4.2
Send BROM version... OK
Send storage config... OK
SyncBmtInfoWithDA... OK
Set params... OK
Read flash info... OK
EMMC_ID: 0x510001154D3336448A9F0142B5A7A3E4
Load EMI from phone... OK
Init DRAM... OK
Enable DRAM... OK
Sync with DA... OK
Wait for DA H/W detection... OK
EMMC INFO:
EMMC_CNAME: QD63MB
EMMC_ID : 0x150100514436334D42019F8AE4A3A7B5
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x0747C00000 (29.12Gb)
RAM INFO:
INT_SRAM: 0x0000020000 (128.00Kb)
EXT_RAM : 0x0080000000 (2.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 10% - 20% device life time used
DeviceLifeTimeEstB: 10% - 20% device life time used
Checking USB status... USB_FULL_SPEED
Switching to USB high speed... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek DA USB VCOM (Android),usb2ser.sys,3.0.1511.0]
You are using driver version 3.0.1511.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
High Speed USB detected at COM11
Open port... OK
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : TECNO
Product Manufacturer : TECNO MOBILE LIMITED
Product Model : TECNO BC2
Product Name : BC2-OP
Product Device : TECNO-BC2
Product Board : k80hd_bsp_fwv_512m
Board Platform : mt6580
Build ID : QP1A.190711.020
Build Date : Tue May 3 13:45:59 CST 2022
Display ID : BC2-VP592AB-QGo-OP-220503V019
Security Patch : 2022-04-05
Version SDK : 29
Version Release : 10
Version Codename : REL
Firmware Version : AB-OP-220503V019
Userdata FS Type : F2FS
Read partition frp... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Tecno_BC2%20(Tecno%20Pop%204)/FRP_BACKUP_(2025-3-6_16-44-14)/
Format FRP... [P1] OK
Writting FRP data... OK
Formatting "userdata" partition... OK
Formatting "cache" partition... OK
Formatting "metadata" partition... OK
Formatting "md_udc" partition... OK
Wipe data done!