GSM-Forum - View Single Post - be5 flash- protected!!!

emsi · 05-10-2002, 18:45

To Comunicatel:

Our software fully supports TOSHIBA flash chips - the SW name is

BE5 ToolBox by MCOMM . (however not free)

There is also free version of BE5 ToolBox Test version, with this you can see, when connected ,whether it is FUJITSU or TOSHIBA - not supported.

YOU ARE USING OLD TOOLBOX by EMSI, and this was coded really long time ago when there was no TOSHIBA in BE5, so therefore it doesn't recognize this flash chip correctly.

And if you don't know what you do you can DAMAGE your phone, because of incorect datas in first few bytes of the flash.

Take care,

EMSI -= MCOMM =-

05-10-2002, 18:45	#7 (permalink)
emsi Insane Poster Join Date: Apr 2001 Posts: 95 Member: 4393 Status: Offline Thanks Meter: 0	To Comunicatel: Our software fully supports TOSHIBA flash chips - the SW name is BE5 ToolBox by MCOMM . (however not free) There is also free version of BE5 ToolBox Test version, with this you can see, when connected ,whether it is FUJITSU or TOSHIBA - not supported. YOU ARE USING OLD TOOLBOX by EMSI, and this was coded really long time ago when there was no TOSHIBA in BE5, so therefore it doesn't recognize this flash chip correctly. And if you don't know what you do you can DAMAGE your phone, because of incorect datas in first few bytes of the flash. Take care, EMSI -= MCOMM =-